Advertisement
RoomWizard® Features
3
1:
Digital Range Display
Readouts display the current signal field range setting.
2:
Power On/Off and Range Adjustment Buttons
If the Range Display is not lit, pressing the upper ("+") button will turn the
transmitter on. Pressing both buttons ("+" and "-") at the same time will turn the
transmitter off.
Pressing the upper ("+") button will increase the signal field emanating from the
boundary wire. This will effectively increase the area on both sides of the wire, where
your pet will receive a correction. Pressing the lower ("-") button will decrease this
area. When used in wireless mode, the signal field range adjustments will increase
or decrease the area sur rounding the unit.
3:
AC Adapter Power Connector
Plug in the AC adapter that came with the unit, into the "Power" connector on the
left. Only use an approved PET STOP® AC adapter.
4:
Wired Mode Adapter Cord Connector
When using the transmitter with boundary wire, plug in the Wired Mode adapter cord
at the right connector labeled "Loop".
6
1
2
4
The Receivers
Low Battery Indicator
Comfort Contacts
Battery Cover
Low Battery Indicator
UltraElite Receiver
®
The lightweight Pet Stop UltraElite receiver
is equipped with a Flash Alert
low battery
®
light. This indicator will flash red for several
days before the battery expires.
Contact your local Pet Stop dealer for a new
battery.
Comfort Contacts
Soft Tip Probes
®
Our Comfort Contacts probes are an
important part of the Pet Stop system. In
order for your dog to feel a correction the
soft rubber probes need to make contact
with the dog's skin.
Your Pet Stop dealer will demonstrate how
to properly place the receiver collar on your
dog.
Battery Cover
Remove this cover using a flat-ended
screwdriver or coin to replace the battery.
UltraMax Receiver
®
The robust Pet Stop UltraMax receiver has
been specifically designed for stubborn or
high energy dogs.
Contact your local Pet Stop dealer for a new
battery.
11
Advertisement
