Table of Contents
Advertisement
Quick Links
At the end of its serviceable life, this product should not be treated as household or general
waste. It shold be handed over to the applicable collection point for the recycling of electrical
and electronic equipment, or returned to the supplier for disposal.
How to contact us:
If you have any questions about using your efergy monitor, or if you'd like further advice about energy saving at home or at
work, please feel free to contact us: Call efergy on +44 (0) 8450177 769
efergy will answer any installation or set-up questions and offer quick energy saving tips. Lines are open between 8.30am
and 5pm Monday to Friday. You can also email us: info@efergy.com. Further information is also available at www.efergy.com
Instructions
Before operating and installation carefully
read all instructions.
Advertisement
Table of Contents
Related Manuals for Efergy Energy metering and monitoring
Summary of Contents for Efergy Energy metering and monitoring
- Page 1 How to contact us: If you have any questions about using your efergy monitor, or if you'd like further advice about energy saving at home or at work, please feel free to contact us: Call efergy on +44 (0) 8450177 769 efergy will answer any installation or set-up questions and offer quick energy saving tips.
-
Page 2: Table Of Contents
How to contact us SETTING TIME AND DATE ..............If you have any questions about using your efergy monitor or if you’d like further advice on monitoring electricity at home, please feel free to contact us, or visit the website SET-UP INSTRUCTIONS ............... -
Page 3: Safety
THIS PRODUCT. 1x Sensor 1x Transmitter When installing the efergy monitor you should find that everything is relatively straight-forward. 1x Display Unit However, there are number of important health and safety issues which you need to be aware You will need to fit the sensor to the live feed... -
Page 4: Find The Feed Cable
FIND THE FEED CABLE Dual Tariff meters (Diagram 3) will The efergy monitor is installed by cliping the sensor around the feed cable of your Diagram 3 often have an Auxiliary cable running electricty meter. between Cable 3 and Cable 4. Auxiliary... -
Page 5: Installation
Insert the jack on the end of the white wire into any of the three input sockets on the transmitter. The clip-on sensor acts as a current sensor and relays the current being drawn in to the home to the transmitter. If your cables are too big for the sensor you can order XL-sensors at www.efergy.com learn button... -
Page 6: Setting Time And Date
SETTING TIME AND DATE SET-UP INSTRUCTIONS The efergy monitor needs to know the time and date in order to provide you with the The efergy monitor needs to know unit cost per kWh charged by your electricity correct information. supplier, along with voltage and alarm settings.The following four steps will move through each of these settings. -
Page 7: Dual Tariff Mode
DUAL TARIFF MODE STEP 3. SINGLE TARIFF SET UP On release you will see the symbol “TARIFF 1” flash. If you If you have a dual or multiple tariff rate meter you may want to set-up the dual tariff are charged one single tariff push MODE button to confirm. function. -
Page 8: How To Change Functions
HOW TO CHANGE FUNCTIONS STEP 3. ELECTRICITY COSTS - TARIFF 1 FUNCTION BUTTON: Press the top FUNCTION button to change the information displayed from instant to average and to history. Default price of 15p/kWh will flash. Use UP and DOWN buttons to change the cost per kWh. -
Page 9: How To Change Modes
HOW TO CHANGE MODES HOW TO CHNAGE THE DATE MODE BUTTON: Press MODE button to change the unit displayed DATE BUTTON: Press DATE button to choose from daily, to weekly and to monthly data. WEEK MONTH POWER COST PER HOUR CARBON EMISSIONS ARROWS: At history mode the arrows are used to scroll between date, weeks and Shows the power of your... -
Page 10: Specifications
Backlight appears to work sometimes, and not other times. Is my display broken? No. The backlight is on a timer to save battery life. The display should work at darkerperiods of the day, when any buttons are pressed. For more information about the e2 and the elink software, go to www.efergy.com...
Need help?
Do you have a question about the Energy metering and monitoring and is the answer not in the manual?
Questions and answers