Onscreen Menus; Using The Guide - JVC 0706TNH-II-IM User Manual

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π † Up and Down arrows mean press the C
buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
è
Left and right arrows mean press the V
to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The "press button" icon means you should press the button named on your remote
control. (Button names appear in S
The "helping arrow" icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the M
appears in green is the one currently selected. If you use the Menu button on the TV's side
panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT
will appear between INITIAL SETUP and PICTURE ADJUST. The "interactive plug-in menu" will
appear the first time the TV is plugged in.
Note:
• Menus shown in this book are illustrations, not exact replications of the television's onscreen
displays.
32
H
OLUME
C
MALL
INITIAL SETUP
PREVIOUS
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
SET LOCK CODE
NEXT PAGE
SELECT OPERATE
+ or C – buttons. Pressing the C
H
+ or V - buttons to move left or right
OLUME
L .)
APITAL ETTERS
button on the remote control. The item that
ENU
(4/5)
EXIT
MENU
+ or C –
H H