Download Print this page

JVC 0310SCT-NF-MT Instructions

Wide lcd panel tv.
Hide thumbs
   

Advertisement

WIDE LCD PANEL TV INSTRUCTIONS
LT-19A1
© 2010 Victor Company of Japan, Limited
Safety Precautions
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
• Follow this manual regarding setup!
• Hold the TV so as not to scratch the screen!
- Connect only to a 110-240 V, 50/60Hz AC outlet.
- Do not touch the screen when carrying the TV.
• Make enough room for inserting and removing the power
• Never dismantle the rear panel!
- It many cause an electric shock.
plug!
• Place the TV as close to the outlet as possible!
• Never obstruct the ventilation holes!
- It may cause overheating or a fi re.
- The main power supply for this TV is controlled by inserting or removing
the power plug.
• Handle LCD panel with care!
- Use a soft, dry cloth when cleaning.
• Never cut or damage the power cord!
- If the AC plug is not the right shape, or the power cord is not long
• Never try repair the TV yourself!
enough, use an appropriate plug adapter or extension
- If the problem cannot be solved in "Troubleshooting" unplug the power
cable. (Consult your retailer)
cord and contact your retailer.
• Unplug the power cord when going out!
• If a television is not positioned in a suffi ciently stable
- The power buttons on the remote control and the TV unit
location, it can be potentially hazardous due to falling. Many
cannot completely turn off the TV. (Make appropriate
injuries, particularly to children, can be avoided by talking
arrangements for bedridden people.)
simple precautions such as:
• Do not allow the TV to fall!
- Using cabinets or stands recommended by the manufacturer of the
- Do not rest your elbows on, or allow children to hang from the TV.
television.
- There is a risk that the TV will fall and cause injuries.
- Only using furniture that can safely support the television.
- Make use of the hole on the back of the stand to prevent the TV from
- Ensuring the television is not overhanging the edge of the supporting
falling easily.
furniture.
• If the TV is damaged or behaving strangely, stop using it at
- Not placing the television on tall furniture (for example, cupboards or
once!
bookcases) without anchoring both the furniture and the television to a
- Unplug the power cord and contact your retailer.
suitable support.
• Never place anything on the TV!
- Not standing the television on cloth or other materials placed between
the television and supporting furniture.
- Placing liquid, naked fl ames, cloths, paper, etc.
- Educating children about the dangers of climbing on furniture to reach
on the TV may cause a fi re.
the television or its controls.
• Never expose to rain or moisture!
- To prevent fi re or electric shock, never allow
liquids to enter the unit.
• Never insert objects into the cabinet
openings!
- It many cause a fatal electric shock.
- Take care when children are near.
• For more details on installation, usage and safety ➔ Consult your
retailer.
Care when setting
9 Power requirements
200 mm
Connect the power cord only to a 110-240V,
50/60Hz AC outlet.
9 Installation requirements
To avoid overheating, ensure the unit has ample
room.
150 mm
50 mm
150 mm
50 mm
Using the TV's Menu ---> Area - 2
Picture Mode
Select the picture as you like.
On Timer
(Standard / Soft / Bright)
Backlight
Darker <--> Brighter
Sleep Timer
Picture
Lower <--> Higher
Brightness
Darker <--> Brighter
Blue Back
Detail
Softer <--> Sharper
Color
Lighter <--> Deeper
Eco Mode
Tint
Reddish <--> Greenish *Only NTSC
White Balance
Select the white balance of the picture.
(Cool / Mid / Warm)
Auto Program
Features
Clear SD
For clearly picture
Channel
(Off / Mode-1 / Mode-2)
Summary
Color
For natural - looking pictures.
Management
(Off / On)
Picture
Fix bright / dark pictures.
Management
(Off / On)
Color
Select an appropriate Color system.
System
(Auto / PAL / SECAM / NTSC3.58 /
Language
NTSC 4.43 / PAL-M / PAL-N)
Video-2 Setting Switch between video and component signal.
Zoom
Change the aspect ratio.
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
Closed Caption Select the desired caption or text channel.
/ 16:9 Zoom Subtitle / Full)
MTS
Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
Bass
Weaker <--> Stronger
Treble
Weaker <--> Stronger
Surround
Ambient sound (Off / On)
Balance
Left Stronger <--> Right Stronger
Al Volume
Prevent sudden increase or decrease of sound.
HDMI Setting Setting for HDMI input. (Size / Audio)
(Off / On)
PC Setting
Viewing Teletext
Watching Video or DVDs
You can watch the Teletext broadcast channel with Text Functions.
1
Select the input source.
1
TV mode <--> TEXT mode
2
Select a Teletext page by press number button (0-9).
• Move up or down a page by CHANNEL +/-.
List Mode
: Book mark your favourite page.
MODE
for select to save
• Operate the connected device and play video.
Press number button
for enter the number
save
2
Select "Set Up" Menu.
of page.
• Recall your favourite page by press the colour button.
HDMI setting
Hold
: Hold the current page.
Size
• Cancel by press this button again.
Reveal
: Display hidden information.
example : answer to a quiz, etc
Audio
Size
: Double the size of the displayed text.
PC Setting
Index
: Returns to page "100" or a previously designated page.
Auto
PC Position : Adjust screen position by 3 / 4.
Cancel
: Leave the current page open, while you switch to watch
TV.
• Useful when running a page search.
Phase
Sub-page
: Display the number of Sub-page.
Pixel
• Cancel by press this button again.
Language group for Teletext
PC Signals that can be displayed
• If the signal doesn't appear, check that the vertical frequency on the PC is
Group
Languages
set to "60Hz".
Group-1
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Resolution
Greek, Swedish, Finnish
Vertical frequency
Group-2
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, German,
French
* Machintosh* computers are not supported.
Group-3
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian,
(Machintosh is a registered trademark of Apple Computer, Inc.)
Croatian, Slovenian, Czech, Slovak, English, German
Group-4
Arabic, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Swedish, Finnish
Group-5
Farsi, Hungarian, English, German, French, Italian, Swedish, Finnish
• If the characters are unreadable. ➡ Select different Teletext language group.
ENGLISH
Set Up and connections
GGT0335-001A-H
0310SCT-NF-MT
VIDEO-2
Component input Composite input
VIDEO-2
VIDEO-2
Y/
Y/
V
V
Pb
L
Pb
L
Pr
R
Pr
R
Game Video
DVD Player
VCR
Remote control buttons and functions
Clear SD
2
3
1
ZOOM
4
5
6
7
8
9
RETURN
+
ECO
0
TV/VIDEO
MENU
OK
DISPLAY
BACK
CHANNEL
VOLUME
MODE
RM-C2020
LCD
To prevent the TV from falling thread the belt
through the hole on the back of the stand and
secure it to the TV rack.
• Insert the batteries
Use two "AAA/R03" dry cell batteries.
Hole for belt
Insert the batteries from the · end,
making sure the · and ª polarities are
Belt
correct.
(not provided)
Screw (not provided)
1
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Turns on the TV from standby mode.
CH
Select a channel. ( 02 - 69 )
Severe noise or snow
On Timer Set a time. ( 00:00 - 12:00 )
Turns off the TV to standby mode.
Check the aerial cable and TV connections .
(Off / 10 / 20 / ...120)
Check the direction of the aerial.
Display a blue screen and mute the sound when the
Check the aerial or its cable damaged or not.
signal is weak or absent. (Off / On)
Patterns, stripes or noise
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2)
Interference caused by devices such as an amplifi er, personal computer,
or a hair drier, Move it away from TV.
Automatically registers channels.
Ghosting (Doubling of images)
Skip
Skip the channel by
(Red)
.
Interference occurs caused by signal refl ection from mountains or building.
Cancel
Cancel the skip channel by
(Green)
.
Try to adjust the aerial's direction or use another antenna.
ID
Edit a channel name by
(Yellow)
.
Cannot turn it on
• Channels are to be skipped cannot be selected by
Ensure the power cord is connected to the AC outlet correctly.
the CHANNEL - / + button.
• The skip can be set to all channels of Air (CH02 - CH69)
Cannot operate the remote control.
and Cable (CC01 - CC125).
The batteries may be exhausted. Replace with new batteries.
Select your desired on screen display language.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
(Video / Component)
Remote control stops working
Closed
Select to view close caption or text
Unplug TV, several minutes later plug it in again.
Caption
information. (Off / CC / Text)
Aspect ratio changed unintentionally
Caption
Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Press "
ZOOM
" button to return to your settings.
Text
Select the desired text channel.
PC screen alignment is off
(T1 / T2 / T3 / T4)
• Closed Caption is not available for component
Adjust the "PC Position" in "PC Setting" of Set Up menu.
signal.
Blue screen appears on the screen
Setting for PC input.
Switch "Blue Back" to "Off".
(Auto / PC Position / Phase / Pixel)
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
AV Select
1. Select
0 01
1 Video - 1
OK
2 Video - 2
2. Set
3 HDMI
4 PC
Technical information
Sound and Colour system in your country or region
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
: Setting for HDMI input.
Yemen, Indonesia, Malaysia, Singapore,
: Auto / 1 / 2
Thailand, India, etc.
If wrong screen size appears in 480p (525p),
Asia,
change to "1" or "2"
China, Vietnam, etc.
Middle
: Auto / Analogue / Digital
East
Hong Kong, etc.
If no sound, change to " Analogue " or " Digital"
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
: Setting for PC input.
Philippines, Taiwan, Myanmar, etc.
: Automatic adjust by 2.
Russia, etc.
Czech Republic, Poland, etc.
And set by
.
OK
Europe
: Sets the focus of screen.
Germany, Holland, Belgium, etc.
: Adjusts the horizontal feature of screen.
UK, etc.
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
Africa
Nigeria, etc.
Egypt, Morocco, etc.
Agentina, Paraguay, Uruguay
South
Brazil
640 x 480 (VGA) / 1024 x 768 (XGA)
America
Chile, Peru, Bolivia, Colombia, Venezuela,
60.0
Ecuador, etc.
4
DVD player
(HDMI compatible)
HDMI
PC
PC
PC IN
(D-SUB)
VIDEO-2
VIDEO-1
HDMI Analog /
Y
V
V
DVI Analog / PC Audio
Pb
L
L
VIDEO-1
Pr
R
R
Game consoles
Video camera
VCR
(DVD Player)
To VIDEO-1
VCR (DVD player)
To VIDEO-1
Adjust Volume
1 Power On / Off
! Volume control / Turn off muting
VOL
VOL
2 Colour buttons
" View the Teletext
3 Turn on "Clear SD"
# Change channel / Page / Hyper Scan
4 Turn on "Zoom"
$ Channel information
5 Turn on "Eco Mode"
% Switch between TV / Video input
CH
CH
6 To Teletext
& Return Plus / Return function
7 Display on-screen menu
( Turn the volume off / on
8 Operate the menu
) Change channel / page
9 To previous screen
Zoom : Change the aspect ratio
V-Scroll
• When 720p or 1080i or 1080p
Zoom
1. Select
signal is received, "Full" and
Auto
Regular
16:9 Zoom
"Slim" can be selected.
Regular
OK
14:9 Zoom
• In PC mode, "Regular" and
2. Set
16:9 Zoom
"Full" can be selected.
16:9 Zoom Subtitle
Full
Move the picture with 3 or 4
while this bar is displayed.
Hyper Scan :
Press and hold
. PR changes without changing the picture screen.
Once you release the button, the picture of the selected PR will appear.
Return Plus : Return to the frequently viewed channel.
Return Plus Programmed by select the frequently viewed channel then press and hold
RETURN+
Return Plus Canceled by press and hold
.
Return : Return to the previously viewed channel.
"AAA/R03"
Batteries
WARNING:
If this symbol is shown,
Batteries shall not be exposed
it is only valid in the
to excessive heat such as direct
European Union.
sunshine, fi re or the like.
Poor picture quality
Unnatural colour >> Adjust "Colour" and "Backlight".
Check "Colour System". If "Auto" is selected.
Select the specifi c colour system manually.
Noise >>
Set to the following functions.
Picture Mode : Standard
Dull picture >>
Set to the following functions.
Picture Mode : Bright
Poor sound
Adjust the "Bass" and "Treble".
If receiving a poor signal in "Stereo/I
II" switch to "Mono".
Adjust the channel reception using "Manual".
For HDMI signal, wrong screen size.
Switch "Size" in "HDMI Setting" to "1" or "2".
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an "HDMI" device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI devices, or
"Analogue" or "Auto" for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use fi ne dots ("pixels") to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUT terminal.
What is "Clear SD"
LCD picture is unstable due to a large number of signal noise. Such noise
System System
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
B/G
PAL
D/K
I
B/G
SECAM
M
NTSC
SECAM
No use "Clear SD"
Use "Clear SD"
D/K
B/G
PAL
Connect "DVI" devices
I
B/G
PAL
Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable.
I
Connect analogue sound output of the DVI device to L and R terminals in
PAL
INPUT VIDEO-2.
B/G
• Set "Audio" in "HDMI Setting" to "Analogue" or "Auto".
SECAM
N
PAL
M
M
NTSC
Initial Settings
1
2
Select a language.
MENU
JVC logo appears
Set Up
Language
English
• The power on the unit can also be used.
Français
Укpaїнcькa
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
AERIAL
If you select Country Area to "Area-1"
4.
Select the teletext language group.
1. Select
Set Up
Teletext Language
OK
Group-1
Group-2
Group-3
Group-4
Group-5
5.
Automatically register channels (Auto Program).
OK
Set Up
Auto Program
CH 40
5 %
6.
Check what was registered.
OK
Set Up
Edit
OR
PR
ID
CH / CC
01
CH 02
02
CH 05
03
BBCABC
CH 47
• If you want to edit channel, follow Edit
04
ABCDEF
CH 09
05
CH 11
06
CH 07
function in Set Up menu.
07
CH 28
08
CH 32
09
CH 12
10
CH 03
Using the TV's Menu ---> Area - 1
Display MENU.
1 / 2
Select Main menu.
(Picture / Sound / Features / Set Up)
3 / 4
Select sub menu.
Picture
1 / 2
Change setting.
Picture Mode
Soft
Backlight
Contrast
When 2 is shown.
Brightness
Sharpness
Colour
2 Display function setting.
Tint
White Balance
Warm
Features
3 / 4 Select function.
1 / 2 Change setting.
or
Exit from Menu.
Confi rm after setting.
OK
• Please see "Menu operation guide" at the bottom of menu on-screen.
Select the picture as you like.
Picture Mode
(Standard / Soft / Bright)
Backlight
Darker <--> Brighter
Contrast
Lower <--> Higher
Brightness
Darker <--> Brighter
Sharpness
Softer <--> Sharper
Lighter <--> Deeper
Colour
Reddish <--> Greenish *Only NTSC
Tint
Select the white balance of the picture.
White Balance
RETURN+
.
(Cool / Mid / Warm)
Features
Clear SD
For clearly picture
(Off / Mode-1 / Mode-2)
Colour
For natural - looking pictures.
Management
(Off / On)
Picture
Fix bright / dark pictures.
Management
(Off / On)
Colour
Select an appropriate Colour system.
System
(Auto / PAL / SECAM / NTSC3.58 /
NTSC 4.43 / PAL-M / PAL-N)
Zoom
Change the aspect ratio.
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
/ 16:9 Zoom Subtitle / Full)
2
CH / CC
US
: The United States, Philippines, etc.
CCIR : The Middle East, Southeast Asia, etc.
OIRT : Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA : Australia, etc.
Channel
CH 48
US-48, W+63 E48
CH
US
CCIR
OIRT
AUSTRALIA
CH 49
US-49, W+64 E49
CH 02
US-02
E2
R1
AU-0
CH 50
US-50, W+65 E50
CH 03
US-03
E3
AU-1
CH 51
US-51, W+66 E51
CH 04
US-04
E4
R2
AU-2
CH 52
US-52, W+67 E52
CH 53
US-53, W+68 E53
CH 05
US-05
E5
R6
AU-6
CH 06
US-06
E6
R7
AU-7
CH 54
US-54, W+69 E54
CH 07
US-07
E7
R8
AU-8
CH 55
US-55, W+70 E55
CH 56
US-56, W+71 E56
CH 08
US-08
E8
R9
AU-9
CH 09
US-09
E9
CH 57
US-57, W+72 E57
CH 58
US-58, W+73 E58
CH 10
US-10
E10
R10
AU-10
CH 59
US-59, W+74 E59
CH 11
US-11
E11
R11
AU-11
CH 60
US-60, W+75 E60
CH 12
US-12
E12
R12
CH 61
US-61, W+76 E61
CH 13
US-13
CH 62
US-62, W+77 E62
CH 14
US-14, W+29
CH 63
US-63, W+78 E63
CH 15
US-15, W+30
CH 64
US-64, W+79 E64
CH 16
US-16, W+31
CH 65
US-65, W+80 E65
CH 17
US-17, W+32
CH 66
US-66, W+81 E66
CH 18
US-18, W+33
CH 67
US-67, W+82 E67
CH 19
US-19, W+34
CH 68
US-68, W+83 E68
CH 20
US-20, W+35
CH 69
US-69, W+84 E69
CH 21
US-21, W+36 E21
CH 22
US-22, W+37 E22
CH 23
US-23, W+38 E23
CH 24
US-24, W+39 E24
CC
US
CH 25
US-25, W+40 E25
CC 01
CH 26
US-26, W+41 E26
CC 02
CH 27
US-27, W+42 E27
CC 03
CH 28
US-28, W+43 E28
CC 04
CH 29
US-29, W+44 E29
CC 05
CH 30
US-30, W+45 E30
CC 06
CH 31
US-31, W+46 E31
CC 07
CH 32
US-32, W+47 E32
CC 08
CH 33
US-33, W+48 E33
CC 09
CH 34
US-34, W+49 E34
CC 10
CH 35
US-35, W+50 E35
CC 11
CH 36
US-36, W+51 E36
CC 12
CH 37
US-37, W+52 E37
CC 13
CH 38
US-38, W+53 E38
CC 14
A
CH 39
US-39, W+54 E39
CC 15
B
CH 40
US-40, W+55 E40
CC 16
C
CH 41
US-41, W+56 E41
CC 17
D
CH 42
US-42, W+57 E42
CC 18
E
CH 43
US-43, W+58 E43
CC 19
F
CH 44
US-44, W+59 E44
CC 20
G
CH 45
US-45, W+60 E45
CC 21
H
CH 46
US-46, W+61 E46
CC 22
I
CH 47
US-47, W+62 E47
CC 23
J
Specifi cation
Main unit
Broadcasting systems B / G / I / D / K / M / N
PAL / SECAM / NTSC 3.58 MHz / NTSC 4.43 MHz
Colour systems
/ PAL-M / PAL-N
VHF low channel (VL) = 46.25 to 140.25 MHz
Area-1
VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Channels and
VHF low channel (VL) = 55.25 to 127.25 MHz
frequencies
Area-2
VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
Sound-multiplex
NICAM ( I / B / G / D / K ), A2 (B / G / D / K)
systems
MTS (Multi-channel Television Sound)
Teletext systems
FLOF (Fastext), WST (World System Teletext)
Power requirements
AC 110 V - 240 V, 50/60Hz
Audio output
3 W + 3 W
(Rated power output)
Speakers
(3.5 cm x 5.5 cm ) x 2
Power consumption
32 W
[standby]
[0.5 W]
Screen size
(visible area size
47 cm
measured diagonally)
Dimensions
475 x 356.8 x 181.3
(W x H x D: mm)
[475 x 311.8 x 59.5]
[without stand]
Weights
4 kg
[without stand]
[3.5 kg]
Power cord x 1
Remote control unit : RM-C2020 x 1
Accessories
AAA/R03 dry cell battery x 2
Screw x 1
5
3
Select Country Area.
Set Up
1. Select
Country Area
1. Select
ภาษาไทย
ไทย
Area - 1
Area - 2
OK
OK
Portugues
Melayu
2. Set
2. Set
Pуccкий
Castellano
• The select the new Country Area after Initial Setting has completed.
(While the cursor is pointing to Picture
1
menu and hold for 3 seconds.)
If you select Country Area to "Area-2"
4.
Select Air or Cable.
1. Select
Set Up
Auto Program
OK
Air
Cable
2. Set
5.
Searching for the channels (Auto Program)
Set Up
Auto Program
CH 40
5 %
6.
Check what was registered.
OK
Set Up
Channel Summary
CH/CC
ID
Skip
CH 02
Yes
CH 03
Yes
CH 04
BBCABC
Yes
CH 05
ABCDEF
Yes
• If you want to set undesired channels
CH 06
Yes
CH 07
Yes
to be skiped, follow Channel Summary
CH 08
Yes
CH 09
Yes
CH 10
Yes
function in Set Up menu.
CH 11
Yes
Stereo / I
Select the stereo, mono or bilingual language.
9
II
(I / II / O / m / Mono )
Bass
Weaker <--> Stronger
Treble
Weaker <--> Stronger
Surround
Ambient sound (Off / On)
Balance
Left Stronger <--> Right Stronger
Al Volume
Prevent sudden increase or decrease of sound.
(Off / On)
On Timer
Turns on the TV from standby mode.
PR
Select a channel. ( 01 - 99 )
On Timer Set a time. ( 00:00 - 12:00 )
Sleep Timer
Turns off the TV to standby mode.
(Off / 10 / 20 / ...120)
Blue Back
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Adjust picture contrast to match your room brightness.
Eco Mode
(Off / Eco-1 / Eco-2)
Auto Program
Automatically registers channels.
Move
Move a channel position by 2
Edit / Manual
and Adjust by 3 / 4.
ID
(Red)
Edit a channel name by
.
Insert
Insert a channel by
(Green)
.
Select a CH/CC by 3 / 4.
Enter number by 0-9 buttons.
Delete
Delete a channel by
(Yellow)
.
Manual
Register a new channel by
(Blue)
.
(Red)
(Green)
Beginning channel search by
and
.
(Yellow)
(Blue)
Channel fi ne tunning by
and
.
If the picture or sound is unnatural by
for select a system.
Language
Select your desired on screen display language.
Video-2 Setting Switch between video and component signal.
(Video / Component)
Teletext
Select Teletext language group.
Language
(Group-1/ Group-2/ Group-3/ Group-4/ Group-5)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting
Setting for PC input.
(Auto / PC Position / Phase / Pixel)
(continued)
3
CC 24
K
S-24
CC 25
L
S-25
CC 26
M
S-26
CC 27
N
S-27
CC 28
O
S-28
CC 29
P
S-29
CC 30
Q
S-30
CC 31
R
S-31
CC 32
S
S-32
CC 33
T
S-33
CC 34
U
S-34
CC 35
V
S-35
CC 36
W
S-36
CC 37
W+1
S-37
CC 38
W+2
S-38
CC 39
W+3
S-39
CC 40
W+4
S-40
CC 41
W+5
S-41
CC 42
W+6
CC 43
W+7
CC 44
W+8
CC 45
W+9
CC 46
W+10
CC 47
W+11
CC 48
W+12
Channel
CC 49
W+13
CCIR
OIRT
AUSTRALIA
CC 50
W+14
S-1
AU-5
CC 51
W+15
S-2
CC 52
W+16
S-3
CC 53
W+17
CC 54
W+18
S-4
CC 55
W+19
S-5
CC 56
W+20
S-6
AU-5A
CC 57
W+21
S-7
CC 58
W+22
S-8
CC 59
W+23
S-9
CC 60
W+24
S-10
CC 61
W+25
S-11
CC 62
W+26
S-12
CC 63
W+27
S-13
CC 64
W+28
S-14
CC 75
X
S-15
CC 76
Y
R3
S-16
CC 77
Z
R4
AU-3
S-17
CC 78
Z+1
R5
S-18
CC 79
Z+2
AU-4
S-19
CC 95
A-5
S-20
CC 96
A-4
S-21
CC 97
A-3
S-22
CC 98
A-2
CC 99
A-1
S-23
Terminals / Connectors
Terminal name
Terminal type
Signal type (IN)
VIDEO-1
RCA connectors x 3 Composite video, Audio L/R
RCA connectors x 5 Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
VIDEO-2
(625p),
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
Input
terminals
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
HDMI
(750p) / 1080i (1125i) / 1080p
(1125p)
PC INPUT
D-SUB (15 pins) x 1 Analogue PC signal
HDMI Analogue/
DVI Analogue/
RCA connectors x 2 Audio L / R
PC Audio
• HDMI Analogue / DVI Analogue / PC Audio use terminal common with
VIDEO-2.
• We may change the design and specifi cations without notice.
• HDMI, the HDMI Logo and High-Defi nition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
6

Advertisement

   Related Manuals for JVC 0310SCT-NF-MT

This manual also for:

Ggt0335-001a-h, Lt-19a1

Comments to this Manuals

Symbols: 0
Latest comments: