Factory Schedule; Off, Auto, Heat, Cool Or Em Ht; Selecting Fan; Auto Or Cont - Aprilaire 8710 Owner's Manual

fACTORY SCHEDUlE

The thermostat is shipped with the following factory
schedule .
Setpoint
program Start Time
Heating Cooling
Morning 6:00AM 70F
Day 8:00AM 62F
Evening 5:00PM 70F
Night 10:00PM 62F
WARNING
The thermostat is battery powered and the
batteries should be changed every year or
when the low battery warning is displayed.
4
SElECTING SYSTEM

Off, AUTO, HEAT, COOl OR EM HT

Press the SYSTEM key to select Off, AUTO (heating
and cooling), HEAT (heating), COOl (cooling) or EM HT
(emergency heating if your system is a heat pump) .
In AUTO the thermostat will call for heating or cooling
based on the heating and cooling set temperatures and
the indoor temperature . To view both the heating and
78F
cooling set temperature in Auto mode, press and hold
82F the NExT key . The LCD will display Heat Set To and
then Cool Set To along with with the corresponding set
78F
temperature . Use the Up and Down keys to change the
82F set temperature when the proper mode is displayed .
Inside
Th
AM
NEXT
MENU HOLD ENTER

SElECTING fAN

AUTO OR CONT

Press the fAN key to select AUTO or CONT
(continuous) fan operation . In AUTO the thermostat
activates the fan during heating and cooling calls . In
CONT the fan runs continuously to circulate air .
SYSTEM
MODE
Heat
Set To MENU
HEAT
SElECTING SCHEDUlE OR
pERMANENT HOlD
AUTO
Press the HOlD key to switch between Hold, Hold
permanent and Schedule . Schedule operation
automatically changes the heating and cooling
temperature settings at the four scheduled times –
Morning, Day, Evening and Night .
When in Schedule operation, adjusting the heating
or cooling temperature using the Up and Down
keys switches to the Hold mode . After 3 hours the
thermostat returns to the Schedule mode . Press the
HOlD key at any time to return to the Schedule mode .
The Hold permanent mode maintains the heating
and cooling temperatures indefinitely until the HOlD
key is pressed which will return the thermostat to the
FAN
Schedule operation .
MODE
Set To
Inside
HEAT
Th
AUTO
AM
NEXT
HOLD ENTER
SCHEDULE
MODE IN
Heat
DAY
Set To
SCHEDULE
Inside
HEAT
Schedule Day
Th
AUTO
AM
NEXT
MENU HOLD ENTER
HOLD KEY
5