JVC 0109TSH-II-IM User Manual page 47

Connect a Digital Source Device
TV Rear Panel
INPUT 1
HDMI ANALOG
AUDIO
After the connections have been made,
tighten the screw to secure the cables.
Notes:
• To watch your digital source device, make sure your TV is displaying INPUT 1 by pressing the
V1 button on your remote control.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
• The INPUT 1 HDMI ANALOG AUDIO input can only be used with INPUT 1.
Connect a Camcorder
Camcorder
Notes:
• To watch video from your camcorder, make sure your TV is displaying INPUT 4 or INPUT 5
by pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-video Output with an S-Video Cable.
Digital Source Device
L R
DIGITAL OUT
AUDIO OUT
TV Rear Panel (INPUT 1)
INPUT 1 INPUT 2 INPUT 2
75 Ω 75 Ω
(VHF/UHF) (VHF/UHF)
TV Rear Panel
(INPUT 4)
INPUT 3 INPUT 3
47