Print Mode - Sharp AR-168N Service Manual

Program
Program name
number
15 KEY TOUCH
SOUND
16 SOUND AT
DEFAULT
17 TONER SAVE
MODE
18 AE LEVEL ADJUST
19 LANGUAGE
20 RESET FACTORY
21 SORT AUTO
SELECT
B. Print mode
Program
Program name
number
1 FORCED OUTPUT
2 USB 2.0 MODE
1
SWITCH *
3 AUTO TRAY
2
SWITCH*
1
* : The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.
2
* : When the 250-sheet paper feed unit is installed.
Setting codes
(factory default setting
appears in bold)
1: LOW • This sets the volume of beep signals.
2: HIGH
3: OFF
1: ON • Use this to sound a beep when a base setting is selected.
2: OFF
1: ON • This mode reduces toner usage by about 10% when copying. Toner save mode is
2: OFF effective when the exposure mode is AUTO or TEXT.
1: RSPF • This is used to adjust the exposure level.
2: DOCUMENT GLASS • The automatic exposure level can be adjusted separately for the document glass
and the RSPF.
• The factory default setting for the exposure level is "center".
1: AMERICAN ENGLISH This is used to set the language used in the display.
2: FRENCH
3: SPANISH
:
:
1: Yes This is used to return all settings to the factory default settings.
2: No
1: ON Use this setting to enable or disable sort auto select mode.
2: OFF
Setting codes
(factory default setting
appears in bold)
1: ON When this function is enabled, printing in printer mode will automatically continue
2: OFF using a different size of paper if the specified size of paper runs out in all trays. This
feature does not function in copy mode.
1: FULL-SPEED This sets the USB 2.0 data transfer speed. To obtain the fastest speed when using
2: HI-SPEED the USB 2.0 connector, first verify that your computer meets the system
requirements (operating system and driver), and then use this program to change
the USB 2.0 mode to "Hi-Speed". Note that the setting should not be changed while
running a TWAIN driver. (For the system requirements.)
1: ON If the paper runs out during printing and there is paper of the same size in another
2: OFF tray, this function automatically switches to that tray (excluding the bypass tray). The
function can be disabled.
AR-168N/168L USER PROGRAM 12 - 2
Explanation
Explanation