Edit To Or From Another Vcr/Other Devices - JVC SR-VDA300U Instructions Manual

58
EN
Edit To Or
From Another
VCR/Other
Devices
You can use your VCR as the playback or recording VCR.
Refer also to the other VCR's instruction manual for
connection and its operations.
Connection
Ex. When using this VCR as the playback VCR
This VCR (for playback)
Y P /C P /C
B B R R
R AUDIO L VIDEO
OUT
AC120V 1A G
To AUDIO
OUT
Audio cable
(supplied)
To Audio
Input
Another VCR (for recording)
CABLE BOX
VHF/UHF
ANTENNA
IN(L-1)
IN
R AUDIO L (MONO) VIDEO
REMOTE PAUSE/
AV COMPULINK
TV
IN (L-2)
S VIDEO S VIDEO OUT
OUT IN
DVB-ASI SYNC
IN POL
–
+
To S VIDEO
OUT
S-video cable
(supplied)
To S-video
Input
This VCR supports the copy protection
technologies of DTLA (Digital Transmission
Licensing Administrator). These technologies are
admitted by DTLA (Digital Transmission Licensing
Administrator).
It is impossible to dub copy-limited signals
between the devices which supports copy
protection technologies of DTLA . It is impossible
to dub to other tapes the program which only one
recording is permitted.
When connecting to other devices, only the
operation of the devices which supports DTLA is
guaranteed. The operation of non-DTLA-supported
devices is not guaranteed.
1
S-VHS/VHS connection
Connect an audio cable between the playback
VCR's audio output connectors and the
recording VCR's audio input connectors.
When using this VCR as the recording VCR,
connect this VCR's audio input connectors to
the audio output connectors on the other VCR.
If the playback VCR is monaural, connect the
audio output connector on the playback VCR
to the left audio input connector on this VCR.
NOTE:
If another VCR does not have S-video input/output
connectors, use a video cable.
EDITING (cont.)