Subscribe to Our Youtube Channel
Related Manuals for DIGITAL YACHT iAIS
Summary of Contents for DIGITAL YACHT iAIS
- Page 1 Installation & Quick Start Guide iAIS Wireless AIS Receiver and NMEA Server QUICK START iAIS VR1.00...
-
Page 2: Before You Start
Fix the two supplied mounting brackets to the base of the AIS 200 with the bolts supplied. Use suitable fixings (not supplied) to fix the IAIS to a flat surface – using the dimensions and details shown in the drawing below. Note... - Page 3 Quick Start Guide DIGITAL YACHT LTD Fixing location drawing Once the unit is secured, connect the AIS/VHF antenna. Ensure the connection is fully made; should feel a slight click as the BNC locks.
- Page 4 When you plug in the iAIS USB cable for the first time, Windows should detect the new hardware and install the drivers automatically. It will allocate a COM Port number to the adaptor (COM1, COM2, COM3, etc.) and it is this...
- Page 5 The most common connection to a dedicated chart plotter is to take the NMEA Output (Orange+ and Brown –) from the iAIS Receiver and to connect it to a free NMEA Input on the plotter. You must then tell the chart plotter that AIS data is connected to this port and set the baud rate to 38,400 Baud –...
- Page 6 If you have an iPhone of iPad, visit the app store and download our complimentary copy of the iAIS app. This simple but powerful app will give you an AIS radar type display of all the AIS target around you. It includes a built-in user...
Need help?
Do you have a question about the iAIS and is the answer not in the manual?
Questions and answers