Subscribe to Our Youtube Channel
Related Manuals for DIGITAL YACHT AISNet+
Summary of Contents for DIGITAL YACHT AISNet+
- Page 1 AISNet+ Internet AIS Receiver Base Station With Built In VHF-AIS Splitter Quick Start Guide for AISNet V2.01 TEL + 44 1179 554474 www.digitalyachtamerica.com sales@digitalyacht.co.uk...
- Page 2 1. Introduction Congratulations on the purchase of your AISNet Internet Base Station AIS Receiver. This version has a built in antenna splitter allowing a VHF antenna connected to a standard marine VHF to be shared with this AIS base station and the VHF –...
- Page 3 Installation Step 2 • Use suitable fixings (not supplied) to fix the AISNet to a flat surface – using the dimensions and details shown in the drawing below. Note that the unit may be installed in any orientation. Dimension drawing Installation Step 3 •...
- Page 4 • You do not need to power up the AISNet for the USB interface to operate and AIS reception can be achieved with the AISNet just taking its power from the USB cable. However, the network interfacing will not operate without the main power supply being connected and turned on.
- Page 5 Configuring the AISNet Network Settings Download and install the latest AISNet Configuration Tool (from the Digital Yacht website). When you run this program, you should see the window shown in Fig 1. Click the “search” icon and the program will search for the AIS Base Station.
- Page 6 Ensure the IP Configuration Method is set to “DHCP”, operation mode is set to “TCP CLIENT” or “UDP” which are two protocols that have been tested with Marine Traffic and should also work with other online AIS services. Now enter the Host IP address and Remote Port given to you by the On-Line AIS service in the relevant boxes.
Need help?
Do you have a question about the AISNet+ and is the answer not in the manual?
Questions and answers