PARKZONE Bf-109G BNF Instruction Manual

PARKZONE Bf-109G BNF Instruction Manual

Charge-and-fly park flyer

Advertisement

© 2009 Horizon Hobby, Inc.
4105 Fieldstone Road
Champaign, IL 61822
Horizon Hobby UK
Units 1-4 Ployters Rd
United Kingdom
Horizon Hobby Deutschland GmbH
Hamburger Strasse 10
25335 Elmshorn
ParkZone
products are distributed exclusively by Horizon Hobby, Inc.
®
DSM and DSM2 are trademarks or registered trademarks of Horizon Hobby, Inc. The Spektrum trademark is used with permission of Bachmann Industries, Inc.
Spektrum radios and accessories are exclusively available from Horizon Hobby, Inc.
Futaba is a registered trademark of Futaba Denshi Kogyo Kabushiki Kaisha Corporation of Japan.
www.parkzone.com
Printed 7/09 15331.1
USA
Staple Tye
Harlow, Essex
CM18 7NS
Germany
Bf-109G BNF

Instruction Manual

Charge-and-Fly
Park Flyer
Wingspan: 43.5 in
Length: 39.4 in
Weight: 35.3 oz
Motor: ParkZone 15-size 720Kv brushless outrunner motor
ESC: E-flite 30-amp Switch-Mode BEC brushless

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bf-109G BNF and is the answer not in the manual?

Questions and answers

Summary of Contents for PARKZONE Bf-109G BNF

  • Page 1: Instruction Manual

    Futaba is a registered trademark of Futaba Denshi Kogyo Kabushiki Kaisha Corporation of Japan. www.parkzone.com Wingspan: 43.5 in Length: 39.4 in Charge-and-Fly Park Flyer ™ Printed 7/09 15331.1 Weight: 35.3 oz Motor: ParkZone 15-size 720Kv brushless outrunner motor ESC: E-flite 30-amp Switch-Mode BEC brushless...
  • Page 2: Specifications

    The charge lead of a 3-cell Li-Po battery will plug with a DSM2 aircraft system can experience the thrill of your first flight with the Bf-109G BNF. This means you ™ charging, make certain the battery is on a heat-resistant...
  • Page 3: Transmitter-Specific Binding Instructions

    DX7 (includes DX7se): 12X: Step 2 A. Start with a blank model memory, or the one you A. Start with a blank model memory, or the one you have selected for the Bf-109G. have selected for the Bf-109G. Transmitter and Receiver Binding Transmitter-Specific Binding Instructions Binding is the process of programming the receiver of DX5e:...
  • Page 4: Attaching The Wing

    Step 3 Step 4 Attaching the Wing Installing the Landing Gear In order to attach the wing of your Bf-109G, please follow 1. Install the main landing gear by inserting it into the these simple instructions: locator hole in the wing. Swivel the landing gear toward the retaining clips and gently snap into place.
  • Page 5: Installing The Propeller And Spinner

    Step 5 Step 6 Attaching the Horizontal Stabilizer Installing the Propeller and Spinner 1. Locate the horizontal stab of the tail. 1. Slide collet onto motor shaft. 2. Slide the stab joiner rod into one side of the stab. 2. Slide spinner backplate followed by the propeller Slide the stab with the joiner rod through the fuselage onto the collet shaft.
  • Page 6: Control Direction Test

    Bf-109G BNF. When the stick is pushed forward, the elevator should • Always make sure you have fully charged the move down.
  • Page 7 The ParkZone Bf-109G is an accurate rendition of the full- slowing down as quickly when the power is pulled all the ParkZone Bf-109G BNF. It is ideal for you to fly at an AMA size Bf-109G. Like the full size, takeoffs and landings are way off, instead of having the propeller freewheel and sanctioned flying field.
  • Page 8: Optional Flaps

    (PKZ4921), and a Y-harness in the Idle/Off position for more than 1 second. The Your Bf-109G BNF comes out of the box with the E-flite (PKZ1063). controller will indicate the soft cutoff voltage setting 30-Amp Pro Switch-Mode BEC Brushless Controller.
  • Page 9: Entering The Programming Mode

    IMPORTANT NOTE ABOUT 74% CUTOFF: This Programming Menu 3 – Timing 3. When you move the throttle stick upward, the motor 6. If you want to make changes in the programming will run. Continue to move the throttle stick upward menus (see specific instructions below) move the option will activate the soft cutoff at 74% of startup The default setting is 15 degrees.
  • Page 10: Troubleshooting

    Programming Menu 5 – Start-Up Rate Troubleshooting 1.4 and 1.6ms). The controller will beep 2 times, b. To select 16kHz PWM Frequency – You will hear indicating you have set the program selection or 2 short beeps. Move the throttle stick to center The default setting is 0.25 seconds.
  • Page 11 By the act of use, setup or a toy. This product is not intended for use by children Make sure that you keep your Bf-109G BNF flying. Replacement parts are available at your local hobby shop or from assembly, the user accepts all resulting liability.
  • Page 12: Warranty Inspection And Repairs

    Warranty Inspection and Repairs United States Compliance Information for the European Union To receive warranty service, you must include your Electronics and engines requiring inspection or repair Instructions for Disposal of WEEE by original sales receipt verifying the proof-of-purchase should be shipped to the following address: Users in the European Union date.

Table of Contents