JVC HM-HDS4EK Instructions Manual page 9

ON-SCREEN DISPLAY (for HDD deck)
When "O.S.D." is set to "ON" (
When pressing MODE (
(Appears for eight seconds.)
When pressing during recording
7
ON-SCREEN DISPLAY (for DV dubbing)
When "O.S.D." is set to "ON" (
You can show or clear the following operational information by pressing
appears and disappears alternately.
When capturing images from the external DV equipment
A Recording speed
B HDD capacity graph
C HDD time counter
D Recording time scale
E HDD mode
F Remote control mode
G Connected DV equipment mode
pg. 82), various operational information appear on the TV screen.
)
pg. 82), various operational information appear on the TV screen.
A HDD capacity graph
(Six conditions (full, 60 hours or less open,
40 hours or less open, 20 hours or less
open, 10 hours or less open, empty) is
displayed in SEP mode.)
B Current recording speed
C Remaining HDD time for each recording
speed
D Recording speed
A Recording time for Instant Timer Recording
(ITR) mode*
* When "d-1" is selected as an input source, this ITR
display does not appear on the TV screen.
. Each time you press
H Connected DV equipment model information
I Input channel
J Sound mode
K Sound input bit-rate*
* Indicates the sound bit-rate of the connected DV equipment
L Connected DV equipment information*
* Maker name and model name, etc. may not appear depending on
the connected equipment.
M Time counter for the connected DV equipment
N Sound monitor mode
O Remote control switch
P Auto capture button
Q Sound monitor switch
R Sound bit-rate*
* Set in DV AUDIO REC setting
S Elapsed recording time
9
, the information