JVC HM-HDS4EK Instructions Manual page 19

Setting satellite receiver's brand and
channel
After installation, set the satellite receiver's brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
Turn on the TV and select the AV mode.
Slide TV/CABLE/SAT switch to the right.
?
A
Turn on the satellite receiver.
Turn on the satellite receiver's power.
B
Access the Main Menu screen on the
recorder.
Press MENU.
C
Access the Initial Set screen.
A Press
to move the arrow to "INITIAL SET UP",
w e
then press .
t
B Press
to move the arrow to "INITIAL SET", then
w e
press OK.
D
Access the Sat Control Set screen.
Press to move the
rt
highlight bar (pointer) to
"SAT CONTROL SET", then
press OK or .
e
E
Enter the satellite receiver's brand.
Press the appropriate number
keys to enter the brand code
from the list on page 20, then
press OK.
If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
If the recorder is in playback or
recording mode, you cannot
set the brand code.
19