Recording Features - JVC DR-MH20S Instructions Manual

BASIC OPERATIONS ON DVD DECK
38
EN

Recording Features

●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
●
Press DVD so that the DVD lamp lights up on the unit.
TV AV/ VIDEO
DISPLAY
7 DVD
CABLE/SAT
TV DVD
DVD
PR+/-
Instant Timer Recording (ITR)
This easy method lets you record for 30 minutes to 6 hours
(selectable in 30 minutes interval), and shuts the unit off after
recording is finished.
1
Press R on the unit to start recording.
2
Press R again to engage the ITR mode.
●
On the front display panel, A0:30B appears.
3
If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by
30 minutes.
NOTES:
● You can only perform ITR using the R button on the unit.
●
When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit automatically performs
ARelief RecordingB (A pg. 49).
Watch Another Programme While Recording On The
Unit
While recording is going on, you can watch another programme on
the TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the
TV in advance. (A pg. 68)
1
During recording, press TV AV/VIDEO to select TV mode.
●
Video mode is disengaged, and the VIDEO lamp on the unit
lights off .
●
The programme received on the TV's tuner is displayed on the
TV screen.
2
Slide the TV/CABLE/SAT/DVD switch to TV.
3
Press PR +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
●
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)