Summit BIM24OS Instructions Manual
Outdoor
Hide thumbs
Also See for BIM24OS:
- Instruction manual (8 pages) ,
- User manual (20 pages) ,
- Instruction manual (16 pages)
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Summit BIM24OS
Summary of Contents for Summit BIM24OS
- Page 1 Outdoor Ice Maker Model BIM24OS Instruction Manual Felix Storch, Inc. Write Serial Number of unit here: Summit Appliance Division 770 Garrison Avenue ____________________________ Bronx, New York 10474 www.summitappliance.com...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS O REDUCE THE RISK OF FIRE ELECTRICAL SHOCK OR INJURY WHEN USING YOUR ICE MAKER FOLLOW WARNING THESE BASIC PRECAUTIONS • EAD ALL INSTRUCTIONS BEFORE USING THE ICE MAKER • EVER CLEAN ICE MAKER PARTS WITH FLAMMABLE FLUIDS HE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION •...
-
Page 3: Installation Instructions
MPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK F THE POWER CORD IS DAMAGED HAVE IT REPLACED THROUGH AN AUTHORIZED SUMMIT PRODUCTS SERVICE CENTER • This ice maker should be properly grounded for your safety. The power cord of this ice maker is equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of electrical shock. -
Page 4: Connecting The Water Supply
• This ice maker requires a standard 115/120 volts AC, 60Hz electrical outlet with three-prong ground. The appliance can resist temporary voltage fluctuations from -15 to +10%. • To prevent accidental injury, the cord should be secured behind the ice maker and not left exposed or dangling. -
Page 5: Operating Your Ice Maker
OPERATING YOUR ICE MAKER Initial Start-Up Operation 1. Plug the appliance into a 115/120V AC polarized and grounded wall electrical outlet. 2. Make sure the water supply is on. As soon as the inner mechanism reaches the proper temperature, the icemaker mechanism will fill the mold with water. 3. -
Page 6: Care And Maintenance
CARE AND MAINTENANCE Cleaning Your Ice Maker • Unplug the ice maker and remove the ice bin. • Wash the inside with a warm water and baking soda solution. The solution should consist of about 2 tablespoons of baking soda to a quart of water. •... -
Page 7: Problems With Your Ice Maker
Ice maker door is opened too often. If your ice maker shows other symptoms than those described above, or if you have checked all items listed as the cause and the problem still exists, then call SUMMIT Customer Service at ®... - Page 8 ® materials and workmanship for a period of one year from the date of original purchase or delivery. Any parts determined to be defective will be replaced by SUMMIT at no charge to you. Plastic parts and outer ® cabinets are warranted to be manufactured to commercially acceptable standards and free from defects at the time of delivery.
Need help?
Do you have a question about the BIM24OS and is the answer not in the manual?
Questions and answers