Table of Contents
Advertisement
EDITING
60
EN
Disc Dubbing (From DVD To VCR)
Dubbing An Entire Disc
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
8
REC MODE
VCR/DVD
DUBB. Lamp
DUBB.
8
1
2
3
4
5
6
7
8
9
0
1
For DVD deck
Load a disc you want to dub.
For VCR deck
Load a cassette with the record safety tab intact.
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press REC MODE repeatedly to set the recording mode.
4
Press VCR}DVD to select the dubbing direction.
5
Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp lights up on the unit.
If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
VCR } DVD
begins automatically.
After dubbing is completed, the VCR deck rewinds the tape
automatically.
To stop dubbing, press 8.
NOTES:
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
The superimposed indication during the operation or dubbing is not
recorded.
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform "Manual Dubbing (From DVD To VCR)"
(
pg. 61).
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
Hide quick links:
Advertisement
Table of Contents
