Manual Dubbing (From Dvd To Vcr) - JVC SR-MV40U Instructions Manual

Manual Dubbing (From DVD To VCR)

Dubbing A Part Of A Disc
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
3
8
REC MODE
REC
VCR/DVD MODE DUBB.
DUBB. Lamp
59
8 3 U
1 2 3
4 5 6
7 8 9
0
PROGRESSIVE SCAN
4
5
9
7
1
For DVD deck
Load a disc you want to dub.
For VCR deck
Load a cassette with the record safety tab intact.
2
Press VCR}DVD to select the dubbing direction.
3
Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
8, 9
4
Prepare the VCR deck for dubbing.
VCR } DVD
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
C Press 7 and 9 simultaneously so that the VCR deck enters the
Record Pause mode.
5
Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp lights up on the unit.
6
Press 8 to stop recording on the VCR deck. Then press VCR/
7
DVD, and press 8 to stop playback on the DVD deck.
NOTES:
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
The superimposed indication during the operation or dubbing is not
recorded.
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
When the progressive mode is set, "}DVD" does not light up on the
front display panel. Press PROGRESSIVE SCAN so that video
output indicator (
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
) lights off on the front display panel.
EDITING
61
EN