Disc Dubbing (From Dvd To Vcr) - JVC SR MV45U Instructions Manual

EDITING
48
EN

Disc Dubbing (From DVD To VCR)

Dubbing An Entire Disc
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
8
REC MODE
VCR/DVD
DUBB. Lamp
DUBB.
8
1 2 3
4 5 6
7 8 9
0
1
Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press REC MODE repeatedly to set the recording mode.
( pg. 36)
4
Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
5
Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
VCR } DVD
begins automatically.
After dubbing is completed, the VCR deck rewinds the tape
automatically. P
lamp.
To stop dubbing, press 8.
NOTES:
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
If you do not want the superimposed indication to be recorded, set
"SUPERIMPOSE" to "OFF" before dubbing. (
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform "Manual Dubbing (From DVD To VCR)"
( pg. 49).
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
ress to turn off the dubbing (
VCR}DVD
)
DUBB.
pg. 59)