Advertisement
After installation, please refer to operation, maintenance and troubleshooting sections in this manual.
If your fan is packaged with a light kit or if you wish to install a separately purchased light kit,
please refer to the insert sheet titled: L
STANDARD WIRING OPTION
*ATTACH BLUE WIRE
ONLY I F ATTACHING
LIGHT KIT WITH FAN
Secure with
twist-lock wire
connectors
(included)
For pullchain controls, follow diagram above.
Make sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house may
vary in color and may not include ground
wire. After wiring is conplete, gently
7
push wires into junction box with wire
nuts pointing upward.
Raise the canopy up and align the two
holes in the canopy with the two holes
9
in the hanger bracket. Secure with two
5/32 x 1/2" screws provided.
Fiber
Washers
Attach blade brackets to blades using
11
the blade bracket screws and washers
provided.
I
NSTALLATION
Note:
K
IGHT
IT
WIRING OPTION WITH WALL SPEED CONTROL
*
For control of fan and optional light from
wall location, follow diagram above.
8
NOTE: A professional electrician is
recommended for this type of installation.
C
OMBO
Combo-Blades feature two high quality
finishes on one blade. Select the one
that best complements your decor, or
10
change the style with just a flip of the
blade.
Remove plastic shipping stabilizer tabs from
motor, if present. The screws, washers and
motor pads are pre-installed to the blade
holders. Attach blade assembly to motor
by tightening first screw one turn, then
12
tighten second screw securely. Then, go
back and tighten first screw securely.
Page 4 – Builder Supreme-English CUL
I
NSTALLATION
Wall
control
-B
LADE
Shipping
Stabilizer
Tab
Advertisement
