Advertisement
AX100/200TFR (30M/60M Battery powered active beams)
AX100/200 TFR are supplied as standard with no
batteries and no wireless transmitters.
This is because the AXTFR can utilize numerous
wireless technologies including : Honeywell, Visonic,
Scantronics, Inovonics etc
Each set of AX100/200TFR require 4 LHS20 batteries
to power the devices. Two for the TX and two for the
RX. Based on these batteries the beams can be
powered for 5 years (AX100TRF) and 3 years
(AX200TFR).
If you wish to signal the output from the device via
your choice of wireless technology then you can ac-
commodate the wireless device within the AXTFR
housing.
Note there are numerous configurations available.
The installer needs to consider the application and
signalling requirements.
The following pages are examples of how various
configurations are possible using Inovonics wireless
products
Advertisement
