Table of Contents
Advertisement
Installation
Security Console
Mounting the console
The Security Console is designed to be installed on a hollow section wall or mounting
panel. A hole is cut into the wall to allow the telephone and power cables to run out
behind the console. A metal bracket is provided which is screwed to the panel. Hooks on
the bracket locate in slots at the back of the console. A small machine screw is provided
which may be used to prevent the unit from being lifted off the hooks.
®
™
PRO2000_DR/AB-6/98
6
Tampa, FL33618
Technical Support: 800 832 4003
Advertisement
Table of Contents
