Selecting The On-Screen Display (Osd) Language; Channel Setting - JVC 0905TNH-FN-FN Instructions Manual

Selecting the On-Screen Display
(OSD) Language
1
In stop mode, press [SET UP].
2
If you select "Advanced Setting
Menu," proceed to step 3.
If you select "Easy Setting Menu,"
proceed to step 4.
3
Select "Display" using
[Cursor U / D], then press [ENTER].
4
Select "OSD Language" using
[Cursor U / D], then press [ENTER].
5
Select the appropriate OSD language
using [Cursor U / D], then press
[ENTER].
OSD Language OSD Language OSD Language
English English
English English English
Deutsch Deutsch
Italiano Italiano
Svenska Svenska
Nederlands Nederlands
6
Press [SET UP] to exit.

Channel Setting

Tuning of this unit to broadcast channels can be
performed in two ways.
Auto Tuning
Programme the tuner to scan only the channels you
can receive in your area.
1
Press [STANDBY/ON
the unit.
2
Turn the TV on and select the input
to which the unit is connected.
3
In stop mode, press [SET UP].
"Easy Setting Menu" or "Advanced Setting Menu"
will appear.
4
Select "Channel" using
VCR DVD
[Cursor U / D], then press [ENTER].
5
Select "Auto Tuning" using
[Cursor U / D], then press [ENTER].
The unit will start storing channels available in
your area.
Wait for several minutes to finish channel storing.
6
Press [SET UP] to exit.
You can select only the channels memorized in
this unit by using [PR
To select a channel
You can select a channel using [PR
enter the channel using [the Number buttons] on the
remote control.
To cancel auto tuning
Press [RETURN] or [SET UP] during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when either VCR or
DVD is in any recording mode (normal recording,
one-touch timer recording or timer recording.)
/I] to turn on
P 01
Auto Tuning Now
].
+/-
], or directly
+/-
19
EN