Table of Contents
Advertisement
Reformatting a Disc Manually
Video
VR
DVD-RW
DVD-RW
DVD-RW
DVD-RW
If you are using a DVD-RW disc, you can format the
disc by performing “Format.” By default it will be in
Video mode. You can change this to VR mode using
the Setting menu.
Note
• When you reformat the disc, the contents of the disc
are erased.
Insert a recordable disc.
1
In stop mode, press [SET UP].
“Easy Setting Menu” or “Advanced Setting Menu”
will appear.
2
Select “Disc” using [Cursor U / D],
then press [ENTER].
3
Select “Format” using
[Cursor U / D], then press [ENTER].
4
Select “Yes” using [Cursor U / D],
then press [ENTER].
Format
Yes
No
Are you sure?
Yes
No
A popup window will appear and prompt you to
confirm.
If you want to cancel formatting, select “No.”
5
Select “Yes” using [Cursor U / D],
then press [ENTER].
Formatting will start.
If you want to cancel formatting, select “No.”
6
Formatting is complete.
100% is indicated.
Note
• It is not possible to use a disc formatted in Video
mode with this unit on other DVD recorders. If you
use the disc on other DVD recorders, reformat the
disc using that DVD recorder.
• You cannot cancel formatting once it has started.
EN
Selecting the Sound Mode
This unit can receive bilingual broadcasts.
You can switch between modes by pressing [AUDIO]
on the remote control. Each mode is indicated on the
TV screen as follows.
• During reception of bilingual broadcasts
Display on the
Mode
Audio output
TV screen
Main audio from both
Main
Main
speakers
Sub audio from both
Sub
Sub
speakers
• Main audio from the left
speaker
Main / Sub
Main / Sub
• Sub audio from the
right speaker
Setting External Input Audio
Video
VR
DVD-RW
DVD-RW
DVD-RW
DVD-RW
DVD-R
DVD-R
When the external input audio is a bilingual
broadcast, or when copying a video tape to a DVD
disc, you can choose “Stereo” or “Bilingual” to record
on a DVD.
1
In stop mode, press [SET UP].
2
Select “Advanced Setting Menu”
using [Cursor U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3
Select “Recording” using
[Cursor U / D], then press [ENTER].
4
Select “External input Audio” using
[Cursor U / D], then press [ENTER].
Recording
DVD
DVD-RW Recording Format
Video mode
Auto Chapter
10 minutes
Timer Programming
Auto Finalise
Bilingual Recording Audio
Main
External input Audio
Stereo
Dubbing Mode
VCR
DVD
Page 26
Advertisement
Table of Contents
