Disassembly Procedure - Yamaha EMX66M Service Manual

EMX66M

DISASSEMBLY PROCEDURE

1. Front Panel Assembly
(Time required: about 3 min)
1-1. Remove the seven (7) screws marked [80] and the
screw marked [90]. (Fig.1)
1-2. Hold volume knobs and pull the panel to the front.
(Fig.1)
1-3. Remove the screw marked [100]. The front panel
assembly can then be removed. (Fig.1)
Front Panel Assembly
[80]
[90]
(Fig. 1)
2. DSP-ZFX Circuit Board
(Time required: about 4 min)
2-1. Remove the front panel assembly. (See Procedure 1)
2-2. Remove the two (2) screws marked [160] to
remove the shield case. (Fig.2)
2-3. Remove the four (4) screws marked [130]. The
DSP-ZFX circuit board can then be removed. (Fig.2)
[240]
14
Body Assembly
[100]
[80]
[160]
[130]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
[160]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
[240]: Cord Binder TS-0708 KSS (VZ765100)
[80]: Bind Head Screw 4.0X12 MFZN2BL (VB132700)
[90]: Bind Head Screw 4.0X20 MFZN2BL (VB403600)
[100]: Bind Head Screw A4.0X8 MFZN2BL (VP156800)
(Fig. 2)
[130]
DSP
[130]