Sirius XM RAdio Starmate 8 User Manual page 47

v. Tune to the available FM channel
you choose in step 4. Press
to tune in steps of .2, i.e., 99.3 to
99.5. Press
steps of 1, i.e., 99.3 to 100.3. Press
the Select button to select the FM
channel.
vi. Start Using is highlighted. Press
the Select button.
vii. The FM channel you selected will
be confirmed on the display screen.
Starmate 8
8 You should hear channel 184 through your vehicle's stereo system. If you
are satisfied with the sound quality, the installation is complete. You are
now ready to activate your Starmate 8.
9 If the selected FM channel doesn't work well for you, work down the list of
FM channels until you find one with which you are satisfied. Each time, you
will need to tune your vehicle's FM radio to the FM channel and then set
your Starmate 8 to transmit on the same FM channel (steps 6 & 7).
If the signal reception is good, showing at least one bar in the lower left corner of
the display, but there is no SiriusXM audio, verify that both Starmate 8 and your
vehicle's FM radio are tuned to the same FM channel (steps 6 & 7). Also ensure
the chosen FM channel is a suitable one to use in your area (step 4). Verify that
nothing is plugged into the AUDIO connector on the PowerConnect Vehicle Dock.
Refer to "Troubleshooting" on page 90 for additional help.
and
and to tune in
will tune to the FM
99.3 FM
Set your vehicle radio to the
above channel to enable audio.
channel.
47