CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
11.
LOWER BLOCK ASSEMBLY
1. Assembly.
3. Align the module exactly to the alignment tabs.
5. Now position the connector side.
Service Manual N95 RM-159/-245/-160/RM320/-321
Page
25
(53)
CONFIDENTIAL
2. Remove the protective film from the 1UJ FLASH MODULE.
4. Smooth it down evenly. Note the components.
6. Do not bend the connector springs while pushing down.
Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 6.0
MGR
12.Sept.2007