Table of Contents
Advertisement
8
View the Confirmation screen.
AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is
displayed on the TV screen. Select AOKB.
9
Press SET UP to complete the setting.
●
Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 75 – 76 for the procedures.
●
Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
●
For information on scrambled broadcasts, refer to AWhen
Receiving A Scrambled Broadcast (HDD & DVD Deck Only)B
(A pg. 76).
IMPORTANT:
●
In certain reception conditions, station names may not be
stored correctly, and Auto Guide Programme Number Set may
not work properly. When the Guide Programme numbers are
not set properly, the programme that you do not intended to
record will be timer recorded by the S
unit. When programming the timer using the S
system, be sure to check the desired channel is selected
correctly. (A pg. 44)
●
Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (A pg. 76, ADelete A
ChannelB)
NOTES:
●
Fine tuning is performed automatically during Auto Channel Set.
If you want to perform tuning manually, refer to AFine-Tuning
Channels Already StoredB (A pg. 76).
●
If you perform Auto Channel Set when the aerial cable is not
connected properly, ASCAN COMPLETED –NO SIGNAL–B
appears on the TV screen in step 8. In such a case, make sure of
the aerial connection and press ENTER; Auto Channel Set will
start again.
●
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (A pg. 76,
AINFORMATIONB)
V
system of the
HOW
IEW
V
HOW
IEW
Manual Channel Set
Store channels that were not stored during Auto Set Up
(A pg. 17), Preset Download (A pg. 18) or Auto Channel Set
(A pg. 74).
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys to select ATUNER SETB, then press G.
4
Press selection keys to select AMANUAL CH SETB, then press
ENTER. The Manual Channel Set screen appears.
5
Press selection keys to select AEDITB, then press ENTER.
6
Press selection keys to select
a blank position in which you
want to store a channel, then
press ENTER. The
Confirmation screen appears.
7
Press selection keys to select
ABANDB, then press ENTER.
8
Press selection keys to
change the band between CH
(regular) and CC (cable), then
press ENTER.
9
Press selection keys to select
ACHB, then press ENTER.
10
Press selection keys to
input the channel number
you want to store.
●
To enter the registered station name (A pg. 88), press
selection keys to select AIDB, then press ENTER. Press F G.
●
For fine tuning adjustment, press selection keys to select
AFINEB, then press ENTER. Press F G to perform fine-tuning.
●
When storing a channel that sends scrambled broadcasts,
press selection keys to select ADECODERB, then press
ENTER. Press selection keys to set ADECODERB to AONB
(AOFFB is the default setting).
●
When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB, ASAT
VIDEOB or ASAT S-VIDEOB, the ADECODERB setting cannot
be changed. (A pg. 63)
11
Press ENTER to enter new channel information. The
Confirmation screen appears.
12
Press SET UP or RETURN to close the Confirmation screen.
●
To change positions, see AChange Station Channel PositionB
(A pg. 76).
●
If you wish to set station names other than the ones registered
in your unit, see ASet Stations (B)B (A pg. 76).
ATTENTION:
Guide Programme numbers are not set when channels are
stored manually. (A pg. 74, AS
SUBSIDIARY SETTINGS
(Example) To store in position 12.
INITIAL SET UP > MANUAL CH SET
PR
CH
ID
PR
CH
01
C01
----
07
02
02
CTEA
08
03
05
1000
09
04
C79
3SAT
10
9LIV
05
01
11
06
04
AB3
12
<
>
MOVE
EDIT
The programme currently
received on the selected channel
position appears behind the
confirmation screen.
INITIAL SET UP > MANUAL CH SET
BAND
CH
CH
----
ID
FINE
OFF
DECODER
RETURN
ENTER
SET UP
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
V
System SetupB)
HOW
IEW
75
EN
ID
----
----
----
----
----
----
RETURN
2
Advertisement
Table of Contents
