NOOK GlowLight User Manual page 94

3. Connect your NOOK to your computer using the USB cable that came with your NOOK. A new, removable
drive should show up in My Computer (Mac users will see the NOOK drive appear on the desktop or in
devices). You should also see a "USB Mode" message on your NOOK screen.
4. From your computer, drag and drop the downloaded *.ZIP file onto the main directory of the NOOK drive.
Do NOT open or unzip the file. You should not create a new folder on the NOOK drive or add the file to any
other existing folder.
5. Eject or Safely Remove the NOOK drive after the file transfer is complete.
When after a few minutes your NOOK goes into sleep mode, it will recognise the file and proceed to install
the update. Once the installation is completed, your NOOK will automatically restart.
NOTE: Please do not turn off your NOOK during the installation process. Your NOOK must remain turned
on while the update is being installed.
6. Once the update has been installed, unlock your NOOK and tap on the small NOOK logo that appears in the
Status Bar for additional information about the update.
94 NOOK GlowLight User Guide