IR signal receiver
When an infrared remote control operating signal has
been transmitted, the signal receiver on the indoor unit
will make a <beep> sound to confirm acceptance of the
signal transmission.
Cooling unit
The table shows the LED indicator lights for the air condi-
tioner unit under normal operation and fault conditions.
The LED indicator lights are located at the middle of the air
conditioner unit.
LED Indicator Lights : Normal Operation And Fault Conditions For Cooling Unit
COOL
(GREEN)
Green
ON
INDICATOR LIGHTS
LED Indicator Lights for Cooling Unit
Normal Operation / Fault Indication
Cool mode
Timer on
Sleep mode on
Ionizer on
Room air sensor contact
Loose / Short
Outdoor coil sensor contact
Loose / Short
Indoor coil sensor contact
Loose / Short
Compressor overload
protection trip or
gas leak
ON or OFF
4
IR Receiver
LED indicator lights
COOL
IONIZER
Action
Call your dealer
Call your dealer
Call your dealer
Blinking
TIMER
SLEEP MODE
–
–
–
–