To Connect To A Tv With The Component Video Input Jacks - JVC XV-S320SL Instructions Manual

To connect to a TV with the component video input jacks

You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO
IN jacks of your TV with the video cables.
Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details
how to make them active.
Blue
Green
The unit
DIGITAL OUT VIDEO OUT
PCM / STREAM COMPONENT
Y P P
B R
COAXIAL
OPTICAL
RIGHT LEFT
S-VIDEO VIDEO
AUDIO OUT
Red
• Connect "Y" to "Y," "P " to "P
B
Enabling the COMPONENT VIDEO OUT
For your TV connection, you can use either the component video output or the S-video output at a time.
When you use the component video output, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the rear
panel to "COMPONENT AND VIDEO" (for XV-S400BK), and to "COMPONENT" (for XV-S300BK/XV-S302SL). Then,
"COMPONENT" appears on the display window for a few seconds.
(Display Window)
VCDVD
PROGRAM
Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed
setting is not effective.
NOTE
• When the component video input jacks of the TV is the BNC type, use an adapter to convert a pin jack to a BNC jack (optional).
Component video cable
Red
(not supplied)
VIDEO OUT SELECT
S-VIDEO COMPONENT
AND AND
VIDEO VIDEO
: For XV-S400BK
White
Audio cable (not supplied)
," "P " to "P " correctly.
B R R
GROUP TITLE TRACK CHAP
RANDOM
AV COMPU LINK
TV
IN
White
Red
1 A - B
Getting started
Blue
Green
Red
Y P P
B R
S-VIDEO
VIDEO
IN
LEFT
AUDIO
RIGHT
English
17