Sending Images Automatically; Sync) - Canon PowerShot SX600 HS Getting Started Manual

Sending Images Automatically

(Image Sync)
Images on the memory card that have not been transferred already can be
sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Install and configure the software on the destination computer.
1
Install the software.
z z Install the software on a computer
connected to the Internet
2
Register the camera.
z z
Windows: In the taskbar, right-click [
and then click [Add new camera].
z z Mac OS: In the menu bar, click [
then click [Add new camera].
z z A list of cameras linked to CANON
iMAGE GATEWAY
Choose the camera from which images
are to be sent.
z z Once the camera is registered and the
computer is ready to receive images, the
icon changes to [
(= 93).
],
], and
(= 89) is displayed.
].
3
Choose the type of images
to send (only when sending
movies with images).
z z Press the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
(= 21).
z z Press the <o><p> buttons to choose
[Image Sync], and then press the
<q><r> buttons to choose [Stills/
Movies].
• To choose a Web service as the destination, follow the steps in "Registering
Other Web Services" (= 91) to update the camera settings.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
108