Using The Menu; Selecting A Range; Choosing Images Individually - Canon PowerShot SX600 HS Getting Started Manual

Using the Menu

1
Access the setting screen.
z z Press the <n> button and choose
[Protect] on the [1] tab
2
Choose a selection method.
z z Choose a menu item and an option as
desired
z z To return to the menu screen, press the
<n> button.

Choosing Images Individually

1
Choose [Select].
z z Following step 2 in "Using the Menu"
(= 74), choose [Select] and press the
<m> button.
2
Choose an image.
z z Press the <q><r> buttons to choose an
image, and then press the <m> button.
[ ] is displayed.
z z To cancel selection, press the <m>
button again. [
z z
Repeat this process to specify other
images.
(= 21).
(= 21).
] is no longer displayed.
3
Protect the image.
z z Press the <n> button.
A confirmation message is displayed.
z z Press the <q><r> buttons to choose
[OK], and then press the <m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.

Selecting a Range

1
Choose [Select Range].
z z Following step 2 in "Using the Menu"
(= 74), choose [Select Range] and
press the <m> button.
2
Choose a starting image.
z z Press the <m> button.
z z Press the <q><r> buttons to choose an
image, and then press the <m> button.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
74