Canon PowerShot SX600 HS Getting Started Manual page 157

5
Choose [WPS Connection].
z z Press the <o><p> buttons to choose
[WPS Connection], and then press the
<m> button.
6
Choose [PBC Method].
z z Press the <o><p> buttons to choose
[PBC Method], and then press the <m>
button.
7
Establish the connection.
z z On the access point, hold down the WPS
connection button for a few seconds.
z z On the camera, press the <m> button to
go to the next step.
z z The camera will connect to the access
point.
If you have selected [ { ], [2], or [
z z
step 3, devices connected to the access
point are listed on the [Select a Device]
screen displayed next.
z z If you have selected a Web service in
step 3, go to step 12.
] in
8
For a smartphone connection:
Start CameraWindow.
z z For an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera's N-Mark
=
( , 91) will start CameraWindow on
the smartphone.
z z For other smartphones, start
CameraWindow on the smartphone.
z z The first time CameraWindow is opened,
register a smartphone nickname to be
displayed on the camera.
z z Once the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
9
To connect to a smartphone,
printer, or computer:
Choose the target device.
z z Press the <o><p> buttons to choose
the target device name, and then press
the <m> button.
z z If you have selected a smartphone, go to
step 11.
z z If you have selected a printer or
Macintosh computer, go to step 12.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
97