Before Using Your Dehumidifier; Install Properly - Whirlpool Coolerator Operation Manual

Before using your dehumidifier
This booklet tells you how to install your dehumidifier, use it and
clean it. Treat your new dehumidifier with care. Use it only to do what
home dehumidifiers are designed to do.
Copy your model and serial number here . . .
If you need service or call with a question,
have this information ready:
1. Complete model and serial numbers
(from the label under the water pan on the
base of the unit).
2. Purchase date from sales slip.
Copy this information in these spaces.
Keep this book and your sales slip together
in a handy place.
Thank you for purchasing a Coolerator
product. Please complete and mail the
Owner's Registration Card furnished with
this product.
Model Number
Serial Number
Purchase Date
Service company Name and telephone
Number
It is your responsibility to make sure your
dehumidifier:
l
Has been properly installed on a floor that is
reasonably level.
l
Is the correct size for the area you want to
dehumidify.
l
Is connected to the proper kind of outlet with
the correct electrical supply and grounding.
(Refer to your "Electrical Requirements.")
l
Is used only for jobs expected of home
dehumidifiers.
l
Is not used by children or anyone not able to
operate it properly.
l
Is properly maintained.
l
Is used in an area where the room tempera-
ture will not fall below 65°F (18.3%).
l
Do not remove Tech Sheet which is inside
the cabinet. Your service technician needs
this information.
Install properly . . .
1. There are two rollers under your
dehumidifier to help you move it more easily.
To move: Remove the water pan, tilt unit forward
and roll to another position.
2. Allow at least 12 inches (30.5 cm)
of space around the unit for good air
circulation.
3. Keep all outside doors, windows and other
openings closed when dehumidifier is operating.
Humid outdoor air will add to the dehumidifier's
operating load.
4. Water pan must be properly positioned,
on the hangers inside the cabinet, when
dehumidifier is operating in order for the
automatic shut-off to operate correctly.
3