Before Using Your Dehumidifier; Install Properly - Whirlpool BHDH2500AS1 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Before Using Your Dehumidifier
Install properly
12
inchss
Personal
injury Hazard
Because
your dehumidifier
weighs
be-
tween 225 kg (50 ibs.) and 83.8 kg (75 ibs.),
depending
on the amount
of water coi-
iected In the pan, it Is recommended
that
you use proper lifting technlquee
when
lifting or moving your unit. Failure to do ao
could result in personal
injury.
1. Allow at least 30.5 cm (12 inches) of space on
all sides of the unit for good air circulation.
:
,
2. Install the unit on a floor, table or shelf. When
installing the unit on a table or shelf, be sure it
is strong enough to support the unit with a full
pan of water. A table or shelf may be a better
position from which to handle the water pan.
Do not sit or stand on this product. The height
of a table or shelf may help prevent icing of
coils due to colder air near the floor (such as
can be found in a basement).
3. Keep all outside doors, windows and other
openings closed when dehumidifier
is operat-
ing. Humid outdoor air will add to the
dehumidifier's
operating load.
4. The water pan must be properly
posi-
tioned, on the hangers inside the cabinet,
when dehumidifier
is operating in order for the
automatic shut-off to operate correctly.
5. On most models, two rollers let you easily
move the dehumidifier.
Remove the water
pan. Tilt unit forward and roll to another
position.
If your model does not have rollers, pick up
the unit to move it to another position.

Advertisement

Table of Contents
loading

Table of Contents