Ethernet Connection - Samsung SND-6084R User Manual

ethernet connection

Connect the Ethernet cable to the local network or to the Internet.
power Supply (SnD-6084r)
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
If both PoE and DC 12V are applied simultaneously, the product will be supplied with power from
`
J
PoE.
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE 802.3af protocols.
- It is advisable to use only one power source from PoE and DC 12V.
Be careful not to reverse the polarity when you connect the power cable.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
power Supply (Sno-6084r/Snv-6084r)
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
When connecting PoE and DC 12V, or PoE and AC 24V at the same time, the unit starts operation
`
J
with the first connected power.
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE 802.3af protocols.
The heater will operate properly only by the power source of AC 24V.
`
- The heater does not work with DC 12V, PoE.
- Use AC 24V in a low-temperature place of less than -10°C.
Be careful not to reverse the polarity when you connect the power cable.
`
AC 24V can be connected in non-polar union.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
English _43