Audio Detection - Samsung SND-6084R User Manual

setup screen

audio detection

You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the
<event (
2. Click <audio detection>.
3. Set whether or not to <enable> .
4. Set the audio detection's sound level.
The lower the level, the smaller the
sound change is detected.
The audio detection level is designed
`
M
to normalize the input data to a value
between 1 and 100 and detect the signal
larger than threshold level. It is unrelated
to the decibel (dB) level.
5. Specify the activation time and activation
condition.
For more information about < Activation time > and < Action > , refer to "Alarm input". (page 122 )
`
6. When done, click [apply (
Select <Video & Audio> - <Audio setup> and set the proper volume for your MIC as an audio
`
M
input source, so that the audio detection function can work properly.
If detected audio level is too low, set the audio input gain to a higher level in <Audio setup>.
`
You can use the audio detection function when the camera is connected with an audio input
`
device.
134_ setup screen
)> tab.
)].