Samsung SND-6084R User Manual page 31

connecting waterproof power cable and Lan cable
1. Remove the dome cover and the case.
2. Pull out the long projected part of the rubber plug
on the bottom and remove it as shown in the figure.
Use an appropriate cable bush for the LAN cable to be
`
J
connected.
- Basic camera : Use the cable with a diameter of
Ø5~6.5.
- Components provided : Use the cable with a diameter of
Ø7~8.5.
3. Insert the power cable into the small hole made by
removing the projected part of the rubber plug in step
2 above, and lay the cable along the long groove.
4. Connect the power cable with the power terminal
block.
English _31