Key Definitions; Description Of Icons On Status Bar; Nserting And Removing Asim Card; Nserting A Memory Card - Zte mobile phone Manual

Key Definitions

Send key
Power key
Volume keys
Center key
End key
Charging interface /USB interface

Description of icons on status bar

Icons Descriptions
Network signal strength
Unread SMS, blinking when message
box is full
GPRS&EDGE
Roaming
Bluetooth
Outdoor/General
Battery status
Inserting and removing a SIM card
You need to insert a valid SIM card into your mobile phone before you can make and receive calls. All your information regarding network
connection plus many of your contacts are saved on the SIM card. So it makes sense to keep it safe from harm – don't touch the metal surface and
keep it far away from electricity or magnetism.
1. Make sure that the phone is switched off and the charger is disconnected from the phone.
2. Turn the phone over and remove the battery cover.
3. Remove the battery if it is already installed.
4. Hold your SIM card with the cut corner oriented as shown and then slide it into the card holder with the gold-coloured contacts facing downwards.
5. Replace the battery first.
6. Replace the battery cover.
Inserting a memory card
1. Open the battery cover .
2. Insert the card with the metal contacts facing downwards until it clicks to the right position as shown in the diagram below.
Dials a number or press to connect an incoming call.
From the home screen, press the key to go to the dialing interface.
Hold the key to power on or off the phone.
Press to adjust the volume.
Press to confirm actions and make selections.
From the home screen, press the key to go to the main menu interface.
Press to exit to the home screen.
Connect the charger to charge the phone.
Using data wire to connect to the PC.
Icons Descriptions
Meeting
Silent
Unread MMS
Call forward
Missed call
Alarm clock set
5