Advertisement
Available languages
Available languages
EN- User guide
This wireless keyboard product is supporting Bluetooth HID.
Installation
Insert two AAA batteries into the slot under the keyboard. Be sure that you insert the batteries using the correct orientation.
Then slide the lever on the left side of the slot to "On". A red indication light on the keyboard's face will light up for a
second. If the indicator light blinks lowly, then your batteries are low on power.
The keyboard will turn itself off shortly after unused and will start up automatically when you press a key. If you want to
completely turn off the keyboard, switch the lever on the reverse side to "Off".
Pairing your product to another device
1.
Hold down the Esc-key and press the K-key at the same time. You may also press the connect button located on the
underside of the keyboard. A red indicator light on the keyboard's face should blink and the product is now
discoverable to other devices.
2.
Search for Bluetooth-devices on your computer, smartphone or other device with which you want to connect
your keyboard.
3.
When the keyboard is found choose to connect and pair the two devices together.
4.
Some devices require a security code to allow pairing. The code will appear on your device screen and use the
keyboard to type in the code.
5.
When your keyboard is paired the indicator light on its face will go out and it is ready to use.
Support
If you experience any problem installing or using this product, don't hesitate to contact us. We appreciate it if you have
the information regarding your computer environment at hand; Operating system version and the item number of your
Deltaco product.
Contact us by email: help@deltaco.eu.
More product and support information can be found at www.deltaco.eu.
2
EN- User guide
BACK
Power Switch
Paring connect button
Battery Compartment
Indicator light
Paring: Esc key + K key
or
Press connect button
BACK
3
Advertisement
