Advertisement
． ．
4.
QUALITY CONTROL
Made in Japan with ISO 9001 Quality Management
The TK-2260EX/3260EX are manufactured in Kenwood's factory in Japan, which has
been certified to ISO9001 international quality management standard.
High-level quality system produces excellent quality product.
Kenwood Original Quality Test Standards for Products
Each transceiver has passed Kenwood's original quality tests, which simulate years
of sustained, demanding use in harsh operating conditions. These tests have higher
thresholds than any other accepted industry standards in the market.
EU-Directives RoHS / WEEE compliance
Kenwood is committed to design and manufacturer of products that are
environmentally friendly. Kenwood factories have been assessed and registered as
ISO 14001 compliant, the international standard for Environment Protection
Management. The
TK-2260EX/3260EX
hazardous substances. They will comply with the EU-directives of RoHS and WEEE.
MIL-STD 810 C/D/E/F
The TK-2260EX/3260EX are fully compliant with U.S. Department of Defence
environmental standards for US MIL-STD 810 C/D/E/F for;
Low Pressure, High Temperature, Low Temperature, Temperature Shock, Solar
Radiation, Rain (incl. Blowing Rain), Humidity, Salt Fog, Dust, Vibration, Shock
． ．
5.
Applicable Standards
Standard
Low Voltage Directive
R&TTE Directive
ATEX Directive
Gas: II 2G Ex ib IIC T4
Dust: II 2D Ex tD ibD A21 IP6X
T110°C
Mining: I M2 Ex ib I
IECEx Scheme
Gas: Ex ib IIC T4 Gb
Dust: Ex ib tb III C T110°C Db IP6X
Mining: Ex ib I Mb
International Protection Standard
Dust & Water Protection:
are designed and produced without using
Detail
EN 60065, EN 60950-1, EN
60215
EN 300 086-2, EN 300 113-
2, EN 300 219-2, EN 301
489-5, EN 301 489-1
EN 60079- 0, EN 60079-11,
EN 61241- 0, EN 61241- 1,
EN 61241-11
IEC 60079- 0, IEC 60079-
11, IEC 61241- 0, IEC
61241- 1, IEC 61241-11
IP 64
ID
CE0168!
TÜV 09
ATEX
7759 X
IECEx
TUR
09.0004X
5
Advertisement
