Connections; Power Supply - Furuno FM-8900S Installation Manual

2.

CONNECTIONS

Connect external equipment at the rear of the transceiver unit.
CH70 RX ANT
Connect DSC
antenna.
2.1

Power Supply

2.1.1 Solas Convention vessels, 100/220 VAC ship's mains
Solas Convention vessels must supply both AC and DC power to the transceiver unit, through an
AC/DC power supply unit. The AC/DC Power Supply Unit PR-240 is optionally available. When
the AC input fails, the DC power is activated.
Connect the reserve source of energy to the DC IN terminal on the PR-240. Connect the AC ship's
mains to the AC IN terminal on the PR-240.
Be sure to ground the unit.
2.1.2 Radio battery
Attach the connector (supplied) to the power cable and connect the cable to the 24 VDC connector
at the rear of the transceiver unit. Connect the wire ends to the radio battery line.
CH70 RX ANT
ANT
JUNCTION
JUNCTION
Connect Junction Box
IF-8900.
ANT
Connect antenna.
4.7A
24VDC
SPKR
PRINTER
PRINTER
Connect Printer
PP-510/PP-8800A.
8
24VDC
Connect power
cable.
GND terminal
Connect ground
wire.
SPKR
Connect external
loudspeaker.