Polaris 2005 Fusion 900 Owner's Manual And Maintenance Information page 38

Instrumentation
MFD Digital Display Programs
History Program
The History Program automatically displays electrical system voltage
level and fuel level.
While in the History mode, press the SET button to view maximum
vehicle speed, maximum engine rpm or the current service interval
setting. The gauge automatically logs the maximum speed and engine
rpm even if the History Program is not currently displayed.
The History Program will display the history of the Maximum Speed,
Maximum RPM and Service Interval settings.
Maximum Speed/RPM Reset
While in either the MAX MPH or the
MAX RPM mode, press and hold the
SET button for three seconds to reset
the recorded maximum values for both
MPH and RPM. Both of these values
are reset at the same time. Reset the
MAX MPH/RPM values before each
run to obtain accurate readings.
NOTE: Due to electrical noise, the
MFD may occasionally
display MAX MPH/RPM
values that are not
representative of actual
values.
FEATURES
35