Pioneer AVH-4000NEX Owner's Manual page 53

5 Touch the following keys to adjust
the left/right speaker balance.
Moves towards the left.
Moves towards the right.
Each time you touch the keys, the left/right
speaker balance moves towards the left or
right.
p "Left25" to "Right25" is displayed as the
left/right speaker balance moves from the
left to right.
p The default setting is "L/R 0".
p You can also set the fader/balance by
dragging the point on the displayed table.
Using balance adjustment
You can adjust the balance between right/
left sound output.
p This function is available when "Rear
Speaker" is set to "Off".
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "Audio" screen appears.
3 Touch [Balance].
The "Fader/Balance" screen appears.
4 Touch the following keys to adjust
the left/right speaker balance.
Moves towards the left.
Moves towards the right.
Each time you touch the keys, the left/right
speaker balance moves towards the left or
right.
p "Left25" to "Right25" is displayed as the
left/right speaker balance moves from the
left to right.
p The default setting is "L/R 0".
p You can also set the fader/balance by
dragging the point on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the
AV source volume and the iPhone applica-
tion volume when the navigation outputs the
guidance voice.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "Audio" screen appears.
3 Touch [Mute Level].
The pop-up menu appears.
4 Touch the item you want to set.
ATT (default):
The volume becomes 1/10.
Mute:
The volume becomes 0.
Off:
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you
adjust the volume level of each source to
prevent radical changes in volume when
switching between sources.
p Settings are based on the FM tuner
volume level, which remains unchanged.
p This function is not available when the FM
tuner is selected as the AV source.
1 Compare the FM tuner volume
level with the level of the source
you want to adjust.
2 Press the HOME button to display
the Top menu screen.
3 Touch the following keys in the
following order.
The "Audio" screen appears.
4 Touch [Source Level Adjuster].
The "Source Level Adjuster" screen
appears.
The following AV sources are set to the same source level adjustment volume
automatically.
Required
cable (sold
separately)
CD-IU201V iPhone/iPod
iPod / iPhone
with a 30-pin
connector
CD-IU201S iPhone/iPod
CD-IH202
iPod / iPhone CD-IU52
with a Lightning Lightning iPhone/iPod
connector Digital AV
Adapter
Android device CD-AH200 Others
p When a USB storage device is connected
to USB port 1 or USB port 2, the source
level adjustment volume is automatically
set to the same level as the USB port
to which the device is connected. The
source level adjustment volume that is
5 Touch the following keys to adjust
the source volume.
Increases the source volume.
Decreases the source volume.
p If you directly touch the area where
the cursor can be moved, the SLA set-
ting will be changed to the value of the
touched point.
p "+4" to "–4" is displayed as the source
volume is increased or decreased.
p The default setting is "0".
Smartphone Setup
AV sources
Device Connection
USB1
iPod1
USB
aha
Pandora
USB1
aha
Pandora
USB
iPod1
AppRadio
Mode
aha
AppRadio
Digital AV
Mode
adapter
HDMI
Pandora
aha
AppRadio
HDMI Mode
HDMI
Pandora
automatically set varies depending on
whether the device is connected to USB
port 1 or USB port 2.
p When an iPod / iPhone with a Lightning
connector is connected to USB port 1
or USB port 2 using a USB interface
Chapter
23
53
En