Adjusting The Image Size (For Smartphone Users); Displaying The Image Of Your Application (Iphone With 30-Pin Connector); Displaying The Image Of Your Application (Iphone With Lightning Connector); Displaying The Image Of Your Application (Smartphone) - Pioneer AVH-4000NEX Owner's Manual

3 Touch the text input area on the
application operation screen.
A keyboard for entering text appears.
7
6 5 4 3
1 Enters the characters.
2 Deletes the entered text one letter at a
time, beginning at the end of the text.
3 Confirms the entry and allows you to
proceed to the next step.
4 Hides the keyboard and the text can now
be entered using the keyboard of the
iPhone.
5 Changes the iPhone keyboard layout.
p The iPhone keyboard layouts that can be
selected by tapping depends on the set-
ting for Hardware Keyboard Layout set on
your iPhone.
6 Switches to a keyboard offering numeric
characters and symbols.
7 Converts the case of the keyboard
characters.
Adjusting the image size (For
smartphone users)
Black dots may appear on the screen when
using AppRadio Mode with an Android
device connected to this product.
CAUTION
This setting is available only when you stop
your vehicle in a safe place and apply the
parking brake.
p This function can be set under the follow-
ing conditions:
— When an Android device is connected to
this product using the CD-AH200 (sold
separately), and when AppRadio Mode
is available after a Bluetooth connection
using SPP (Serial Port Profile) has been
established.
p If this setting has not been set, the set-
ting screen automatically appears in the
following cases:
— When entering AppRadio Mode after a
Bluetooth connection using SPP (Serial
Port Profile) has been established.
— When a Bluetooth connection using SPP
(Serial Port Profile) has been established
in AppRadio Mode.
1 Press the HOME button to display
1 the Top menu screen.
2 Touch the following keys in the
2
following order.
The "System" screen appears.
3 Touch [Input/Output settings].
4 Touch [AppRadio Video
Adjustment].
The confirmation screen appears.
5 Touch [OK].
6 Touch the following keys to adjust
the line to fit smartphone image
size.
Moves the line to the left.
Moves the line to the right.
Moves the line upward.
Moves the line downward.
7 Touch [Preview].
p Confirm that the whole image fills the
screen.
8 Touch [OK].
p If you want to adjust the setting again
from the beginning, touch [Reset].
Displaying the image of your
application (iPhone with 30-pin
connector)
You can set an image of an application
for iPhone, which is not compatible with
AppRadio Mode, to be shown on the
screen.
p Depending on the type of application, you
may not be able to see the image on the
screen.
p You can only control the application on
the connected device.
p When you touch the display in this func-
tion, "Don't Touch" mark appears on the
upper right corner of the screen.
1 Connect your iPhone.
For details, refer to Connecting an iPhone
with 30-pin connector on page 69.
2 Press the HOME button to display
the Top menu screen.
3 Touch [APPS].
A message, which notifies you that your
iPhone can launch the application, appears
on the screen.
A message, which asks you whether you
want to launch your application, appears on
your iPhone.
4 Use your iPhone to refuse to
launch the application.
5 Touch [OK] on the screen of this
product.
The black screen appears.
6 Launch an application on your
iPhone.
An image of the application appears on the
screen.
7 Press the HOME button to return to
the Top menu screen.
Displaying the image of your
application (iPhone with
Lightning connector)
You can set an image of an application
for smartphone, which is not compatible
with AppRadio Mode, to be shown on the
screen.
p Depending on the type of application, you
may not be able to see the image on the
screen.
p When you use this function, do not con-
nect other devices via Bluetooth wire-
less technology. Be sure to disconnect
your Bluetooth device before using this
function.
p You can only control the application on
the connected device.
p When you touch the display in this func-
tion, "Don't Touch" mark appears on the
upper right corner of the screen.
1 Connect your iPhone.
p The cable connection method varies
depending on your device.
For details, refer to Connecting an iPhone
with Lightning connector on page 68.
2 Press the HOME button to display
the Top menu screen.
3 Touch [APPS].
The image in your iPhone appears on the
screen.
4 Launch an application on your
iPhone.
An image of the application appears on the
screen.
5 Press the HOME button to return to
the Top menu screen.
Displaying the image of your
application (smartphone)
You can set an image of an application
for smartphone, which is not compatible
with AppRadio Mode, to be shown on the
screen.
p Compatibility with all smartphones is not
guaranteed.
p When you use this function, do not con-
nect other devices via Bluetooth wire-
less technology. Be sure to disconnect
your Bluetooth device before using this
function.
p You can only control the application on
the connected device.
p When you touch the display in this func-
tion, "Don't Touch" mark appears on the
upper right corner of the screen.
Chapter
12
35
En