Panasonic 940P User Manual page 16

Parts
External Port cover
Slide rail
Display rear side
Charging Terminals
Rear side screw covers
Upper part
Middle part
Lower part
TV Antenna
Base: Hinge (Upper part) Stainless steel
Base: Hinge (Lower part) Brass/Tin-cobalt plating
Base: Cap
Flash/Photo Light lens
Screws (Battery compartment)
Battery compartment
Resin part
Battery
terminals
Metal part
Battery
Battery
Terminals
xvi
Materials/Surface Finish
PC resin, Elastomer resin/
Acrylic UV cured coating
Stainless steel/
Fluorinated coating
ABS resin/
Acrylic UV cured coating
Phosphor bronze/
Gold plating on nickel plating
PET resin
ABS resin/
Acrylic UV cured coating
Stainless steel
NiTi alloy
PET resin
PC resin
Aluminium killed steel/
Nickel plating
PC resin
PPS resin
Beryllium copper/
Gold plating on nickel plating
PC resin (label: PET resin)
Glass fiber reinforced epoxy board/
Gold plating on nickel plating
Charger (sold separately)
Do not cover or wrap charger during charging.
May cause overheating, fire or malfunction.
Always use the specified power supply/voltage.
Using incorrect voltage may cause fire or malfunction.
AC Charger: AC100V-240V (household AC outlet only)
In-Car Charger: DC12V, 24V (vehicles with a negative earth only)
Use In-Car Charger in vehicles with a negative (-) earth.
Do not use In-Car Charger if vehicle has a positive (+)
earth.
May cause fire.
Do not use charger in thunderstorms.
There is a risk of suffering electric shock.
Do not handle charger with wet hands.
May cause electric shock or malfunction.
If In-Car Charger fuse blows, always replace it with
specified fuse.
Using the incorrect fuse may cause fire or malfunction. Refer to
the respective manuals for information on the correct fuse
specifications.
If dust accumulates on plug, unplug charger and wipe
with a dry cloth.
May cause fire.
Warning