Power Supply To Motor; Ac/Dc Converter - Electrolux WD001326 Service Manual

Power supply to the motor
The main PCB powers the motor directly via a TRIAC. Reversal of the direction of the motor is effected by
two relays that vary the connection between the rotor and the stator.
A third relay powers the stator in half- or full-range operation, depending on the spin speed.
The speed of the motor is controlled by a signal received from the tachometric generator.
During the spin cycles, the microprocessor checks for an unbalanced load and for excessive foam.

AC/DC converter

This component, which is fitted to certain models only, serves to
convert the alternating current generated by the TRIAC on the
main PCB into a direct current to power the drum motor.
TSE-P 01.01 EB
L1 1.2 mH
D1 25A/600V
C1-C2 47µF
R1 68 KΩ
100 Ω
R2-R3
33/56
599 34 55-61