Initial Settings; Setting Up The Initial Settings - JVC XV-D9000 Instructions Manual

The Initial Settings screen consists of the following three screens.
• Initial Settings 1, Initial Settings 2
These settings are used to set up the settings for playing DVD Audio and DVD Video discs.
• Speaker Settings
These settings are used to adjust the settings to match the speakers connected to the player.

Setting Up the Initial Settings

1 Remove the disc from the disc tray.
• Or stop the disc.
2 Press [SET UP].
The Initial Settings screen is displayed.
To switch between the various Initial Settings screens, press 2/3 to align the arrow (

Initial Settings 1

PREFERENCE1 PREFERENCE2
MENU
AUDIO
SUBTITLE
ON SCREEN
GUIDE
MONITOR TYPE
PRESS KEY
Press 5/∞ to align the arrow (
3
Press 2/3 to select the setting.
4
Each time you press 2/3 the display changes and the displayed setting is selected.
5 Repeat steps 3 and 4 for each setting.
• After you have finished making the settings, press 5/∞ continuously until the arrow appears in the tab again.
Then press 2/3 to select the next screen.
6 When you have finished making all the settings, press [SET UP].
The display returns to the normal display.
P
Initial Settings
Before using the player, set up the Initial Settings to match your system configu-
ration.
You can set up the Initial Settings while a disc is stopped or there is no disc
loaded in the player.
You can perform these operations from the remote control.
SPK.SETTING PREFERENCE1
ENGLISH DIGITAL OUT
ENGLISH DOWN MIX
ENGLISH COMPRESSION
j
ENGLISH SCREEN SAVER
ON AUTO STANDBY
4:3LB
PRESS
) with the item you want to select.
PREFERENCE1
MENU
AUDIO
SUBTITLE
ON SCREEN
GUIDE
MONITOR TYPE
PRESS
Initial Settings 2
PREFERENCE2 SPK.SETTING
PCM ONLY
OFF
OFF
j
MODE 1
OFF
KEY
PREFERENCE2 SPK.SETTING
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ON
4:3LB
KEY
) with the tab.
Speaker Settings
PREFERENCE1 PREFERENCE2 SPK.SETTING
5.1 CHANNEL
LEVEL
DELAY
F.SP Large
C.SP Small
R.SP
Small
BASS S woofer
PRESS KEY TEST TONE
25