Gigaset SE587 WLAN dsl User Manual page 61

Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007
Information for Windows Vista:
Windows Vista requires more advanced rights to execute this command (even if your
user account has administrator rights). Carry out the following steps:
ì
Click Start.
ì
Enter Command prompt in the search box.
ì
Right-click Command Prompt in the result list and select Run as administrator.
ì
If prompted to enter the administrator password or a confirmation, then do this.
The command prompt is opened and you can execute the command.
ì
Then enter the ipconfig /renew command and press the ENTER key.
If the default IP address of the router/access point (192.168.1.1) was not changed, the
IP address should now read 192.168.1.x (with x being a number between 2 and 254).
The Subnet Mask must always be the same as that set on the Gigaset SE587 WLAN dsl
(normally 255.255.255.0) and the Default Gateway must have the IP address of the
router/access point (192.168.1.1). These values confirm that your Gigaset SE587 WLAN
dsl is working.
ì
Enter exit and press the Enter key to close the Command Prompt window.
Local network configuration
61