Configuration Management - Gigaset SE587 WLAN dsl User Manual

Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007
Administration
ì
In the text field, enter the file with the new firmware that you have downloaded
from the Internet or click Browse to search for the file in your PC's file system.
ì
Click Upgrade. The firmware will now be updated.
Do not switch off the Gigaset SE587 WLAN dsl during the updating
W
procedure and do not interrupt the power supply. Switching off the
device can make it unusable. The update can take several minutes.
After a successful update, the device is automatically rebooted. The login screen is dis-
played again.
To see whether the upgrade procedure was completed successfully, check the current
software version displayed on the Device page in the Status menu (page 15).

Configuration Management

When the Gigaset SE587 WLAN dsl has been configured, it is recommended that you
back up the settings. This means you can restore the settings at any time if they are acci-
dentally deleted or overwritten.
ì
In the Administration menu, select: Config Management.
Backing up configuration data
ì
Click Backup to start saving.
You can then set the location in which the backup file is to be saved in a file selection
window.
ì
Select a local directory on your PC where you want to save the configuration file and
enter a file name.
ì
Click Save.
The current configuration data is now saved in the specified file.
34